IMPRESSIVE LARGE CHARLES II PEWTER BROAD RIM ...
Item Ref
P-112
Description:
Antique English pewter broad rim charger of impressive large size. The rim is engrave with a mantled coat of arms, and also bears a set of hallmarks for an unrecorded maker. The reverse rim bears a shield shaped possible makers mark along with a triad 'G' over 'G E'.
Notes on the arms (courtesy of Bonham's):
The arms on this charger are unhatched - the tinctures (colours) of the arms are not designated - and so it is difficult to arrive at a definitive identification of the families they represents.
The dexter arms were borne (in a variety of combinations of tinctures) by various branches of the PALMER family. The sinister arms are probably those of PARKER, first granted by letters patent in 1537 to Henry Parker of Frith Hall, Essex. If this identification is correct, this coat of arms represents the marriage of a male of the Palmer family and a woman bearing the name Parker.
The only identified marriage between a Palmer man and a Parker woman was solemnized in 1645, when Richard Palmer married Olive Parker in Allexton, Leicestershire. The will of Olive Palmer of Loddington, Leicester was proved on 1 February 1678/9.
It is possible, therefore, that the arms on this charger represent the union between the Parker and Palmer families of Leicestershire and Northamptonshire. Three escutcheons, each charged with a pheon are carved in stone above the porch of the Old House, Kibworth Harcourt, Leicestershire. The building also bears the date 1678. It is believed to have been built by William Parker (d. 1699), whose memorial tablet is in Kibworth Beauchamp church.
It is possible that the Richard Palmer who married Olive Parker was a member of the Palmer family of East Carlton, Northamptonshire and Carlton Curlieu, Leicestershire – both very close to Kibworth Harcourt – the most prominent member of which was Geoffrey Palmer (1598-1670), lawyer, MP, royalist and Attorney General, who was knighted and elevated to a baronetcy upon the Restoration in 1660.
Condition:
The charger is in good condition with a lightly polished finish to the front, there are some knife marks to the front showing signs of use. The reverse is unpolished with some flaking oxide.
Repairs: There are no repairs that I can detect
Size: 23.25 inch diameter (59.00cm).
The rim is 4.25 inch (10.80cm), which represents 37%.
Pewterer's reference number:
Pewter Society: - Unrecorded.
Cotterell: Old Pewter: Its Makers and Marks - Unrecorded.
Shipping costs:
UK: £20.00
Europe: £60.00
USA/Canada: £100.00
Other countries: Please ask.
Stock number: P-112.
Antique English pewter broad rim charger of impressive large size. The rim is engrave with a mantled coat of arms, and also bears a set of hallmarks for an unrecorded maker. The reverse rim bears a shield shaped possible makers mark along with a triad 'G' over 'G E'.
Notes on the arms (courtesy of Bonham's):
The arms on this charger are unhatched - the tinctures (colours) of the arms are not designated - and so it is difficult to arrive at a definitive identification of the families they represents.
The dexter arms were borne (in a variety of combinations of tinctures) by various branches of the PALMER family. The sinister arms are probably those of PARKER, first granted by letters patent in 1537 to Henry Parker of Frith Hall, Essex. If this identification is correct, this coat of arms represents the marriage of a male of the Palmer family and a woman bearing the name Parker.
The only identified marriage between a Palmer man and a Parker woman was solemnized in 1645, when Richard Palmer married Olive Parker in Allexton, Leicestershire. The will of Olive Palmer of Loddington, Leicester was proved on 1 February 1678/9.
It is possible, therefore, that the arms on this charger represent the union between the Parker and Palmer families of Leicestershire and Northamptonshire. Three escutcheons, each charged with a pheon are carved in stone above the porch of the Old House, Kibworth Harcourt, Leicestershire. The building also bears the date 1678. It is believed to have been built by William Parker (d. 1699), whose memorial tablet is in Kibworth Beauchamp church.
It is possible that the Richard Palmer who married Olive Parker was a member of the Palmer family of East Carlton, Northamptonshire and Carlton Curlieu, Leicestershire – both very close to Kibworth Harcourt – the most prominent member of which was Geoffrey Palmer (1598-1670), lawyer, MP, royalist and Attorney General, who was knighted and elevated to a baronetcy upon the Restoration in 1660.
Condition:
The charger is in good condition with a lightly polished finish to the front, there are some knife marks to the front showing signs of use. The reverse is unpolished with some flaking oxide.
Repairs: There are no repairs that I can detect
Size: 23.25 inch diameter (59.00cm).
The rim is 4.25 inch (10.80cm), which represents 37%.
Pewterer's reference number:
Pewter Society: - Unrecorded.
Cotterell: Old Pewter: Its Makers and Marks - Unrecorded.
Shipping costs:
UK: £20.00
Europe: £60.00
USA/Canada: £100.00
Other countries: Please ask.
Stock number: P-112.
£2,950
| $3,922 USD | €3,382 EUR
CHARLES II PEWTER 20.25in BROAD RIM CHARGER ...
Item Ref
P-179
Description:
Antique English pewter broad rim charger of 20.25in diameter, by Lawrence Dyer of Aldermanbury, St. Lawrence, London; who worked 1649 - 1691.
The charger has a full set of hallmarks to the front rim and a touchmark to the reverse rim.
The front rim is engraved with a crest, it is suggested that this is the family crest of the Skrymshire family of Norbury, Staffordshire. The paternal arms were granted to John SKRYMSHIRE of Norbury in 1584. The family were derived from Nottinghamshire and the second and third quarters of the paternal quarterly show the arms of the MUSCHAMP family, Geoffrey SKRYMSHIRE (born 1430) having earlier in Nottinghamshire married the heiress Margaret MUSCHAMP (born 1435). Although the maternal impaled arms are at present unidentified it is expected that the arms are a variant of the TALBOT family arms, John SKRYMSHIRE having married Dorothy TALBOT in the early 17th century. The blazon: quarterly of four - 1,4: gules, a lion rampant or, within a bordure vair (Skrimshire). 2,3: azure, a chevron between three butterflies argent (Muschamp) - impaling - argent, two chevronells gules (Talbot?)
Provenance:
A private Oxfordshire collection, purchased from Witney Antiques in 1981.
Condition:
The charger is in good condition with a lightly cleaned and polished finish to the front and reverse.
Repairs: There are a few old and very well executed small repairs as can be seen in the images.
Size: 20.25 inch diameter (51.20cm).
Rim - 3.75in (9.60cm). 37.%.
Weight: TBA grams.
Pewterer's reference number:
Pewter Society: - PS3017.
Cotterell: Old Pewter: Its Makers and Marks - OP1480.
Shipping costs:
Free world wide shipping with DHL is included in the price.
Stock number: P-179.
Antique English pewter broad rim charger of 20.25in diameter, by Lawrence Dyer of Aldermanbury, St. Lawrence, London; who worked 1649 - 1691.
The charger has a full set of hallmarks to the front rim and a touchmark to the reverse rim.
The front rim is engraved with a crest, it is suggested that this is the family crest of the Skrymshire family of Norbury, Staffordshire. The paternal arms were granted to John SKRYMSHIRE of Norbury in 1584. The family were derived from Nottinghamshire and the second and third quarters of the paternal quarterly show the arms of the MUSCHAMP family, Geoffrey SKRYMSHIRE (born 1430) having earlier in Nottinghamshire married the heiress Margaret MUSCHAMP (born 1435). Although the maternal impaled arms are at present unidentified it is expected that the arms are a variant of the TALBOT family arms, John SKRYMSHIRE having married Dorothy TALBOT in the early 17th century. The blazon: quarterly of four - 1,4: gules, a lion rampant or, within a bordure vair (Skrimshire). 2,3: azure, a chevron between three butterflies argent (Muschamp) - impaling - argent, two chevronells gules (Talbot?)
Provenance:
A private Oxfordshire collection, purchased from Witney Antiques in 1981.
Condition:
The charger is in good condition with a lightly cleaned and polished finish to the front and reverse.
Repairs: There are a few old and very well executed small repairs as can be seen in the images.
Size: 20.25 inch diameter (51.20cm).
Rim - 3.75in (9.60cm). 37.%.
Weight: TBA grams.
Pewterer's reference number:
Pewter Society: - PS3017.
Cotterell: Old Pewter: Its Makers and Marks - OP1480.
Shipping costs:
Free world wide shipping with DHL is included in the price.
Stock number: P-179.
£1,950
| $2,592 USD | €2,235 EUR
ANTIQUE IRISH PEWTER CHURCH FLAGON PROBABLY BY ...
Item Ref
P-138b
Description:
Irish Half-gallon capacity church flagon of typical Dublin style, with a bold swan's neck handle, double-dome lid, reeded spout and reeded chairback thumbpiece, probably by John Heaney of Dublin who worked 1763 - 1807.
These flagon were for communion use in Churches.
Literature: See D. Hall, Types of Irish Pewter, In association with the National Museum of Ireland (2005), pp. 23 - 24, for further illustrated examples.
This flagon is one of a pair, the other is stock number P-138d, if the pair are purchased I will discount the total price by 10%.
Condition:
Excellent condition with a polished silver grey finish and some small traces of light oxide.
Repairs: There is an old 'waterproofing' seal to the underside base rim.
Size:
Height to top of thumbpiece: 11.50 in (29.50cm).
Base diameter: 7.25in (18.4cm).
Top diameter: 4.75in (12.00cm).
Capacity: Approximately 1/2 gallon .
Pewterer's reference number:
Pewter Society: - PS4536.
Cotterell: Old Pewter: Its Makers and Marks - OP2242.
Stock number: P-138b.
Shipping costs:
UK: £15.00
Europe: £35.00
USA/Canada: £60.00
Other countries: Please ask.
Irish Half-gallon capacity church flagon of typical Dublin style, with a bold swan's neck handle, double-dome lid, reeded spout and reeded chairback thumbpiece, probably by John Heaney of Dublin who worked 1763 - 1807.
These flagon were for communion use in Churches.
Literature: See D. Hall, Types of Irish Pewter, In association with the National Museum of Ireland (2005), pp. 23 - 24, for further illustrated examples.
This flagon is one of a pair, the other is stock number P-138d, if the pair are purchased I will discount the total price by 10%.
Condition:
Excellent condition with a polished silver grey finish and some small traces of light oxide.
Repairs: There is an old 'waterproofing' seal to the underside base rim.
Size:
Height to top of thumbpiece: 11.50 in (29.50cm).
Base diameter: 7.25in (18.4cm).
Top diameter: 4.75in (12.00cm).
Capacity: Approximately 1/2 gallon .
Pewterer's reference number:
Pewter Society: - PS4536.
Cotterell: Old Pewter: Its Makers and Marks - OP2242.
Stock number: P-138b.
Shipping costs:
UK: £15.00
Europe: £35.00
USA/Canada: £60.00
Other countries: Please ask.
£1,950
| $2,592 USD | €2,235 EUR
ANTIQUE IRISH PEWTER CHURCH FLAGON PROBABLY BY ...
Item Ref
P-138d
Description:
Irish Half-gallon capacity church flagon of typical Dublin style, with a bold swan's neck handle, double-dome lid, reeded spout and reeded chairback thumbpiece, probably by John Heaney of Dublin who worked 1763 - 1807.
These flagon were for communion use in Churches.
Literature: See D. Hall, Types of Irish Pewter, In association with the National Museum of Ireland (2005), pp. 23 - 24, for further illustrated examples.
This flagon is one of a pair, the other is stock number P-138b, if the pair are purchased I will discount the total price by 10%.
Condition:
Excellent condition with a polished silver grey finish and some small traces of light oxide.
Repairs: There is an old 'waterproofing' seal to the underside base rim.
Size:
Height to top of thumbpiece: 11.50 in (29.50cm).
Base diameter: 7.25in (18.4cm).
Top diameter: 4.75in (12.00cm).
Capacity: Approximately 1/2 gallon .
Pewterer's reference number:
Pewter Society: - PS4536.
Cotterell: Old Pewter: Its Makers and Marks - OP2242.
Stock number: P-138d.
Shipping costs:
UK: £15.00
Europe: £35.00
USA/Canada: £60.00
Other countries: Please ask.
Irish Half-gallon capacity church flagon of typical Dublin style, with a bold swan's neck handle, double-dome lid, reeded spout and reeded chairback thumbpiece, probably by John Heaney of Dublin who worked 1763 - 1807.
These flagon were for communion use in Churches.
Literature: See D. Hall, Types of Irish Pewter, In association with the National Museum of Ireland (2005), pp. 23 - 24, for further illustrated examples.
This flagon is one of a pair, the other is stock number P-138b, if the pair are purchased I will discount the total price by 10%.
Condition:
Excellent condition with a polished silver grey finish and some small traces of light oxide.
Repairs: There is an old 'waterproofing' seal to the underside base rim.
Size:
Height to top of thumbpiece: 11.50 in (29.50cm).
Base diameter: 7.25in (18.4cm).
Top diameter: 4.75in (12.00cm).
Capacity: Approximately 1/2 gallon .
Pewterer's reference number:
Pewter Society: - PS4536.
Cotterell: Old Pewter: Its Makers and Marks - OP2242.
Stock number: P-138d.
Shipping costs:
UK: £15.00
Europe: £35.00
USA/Canada: £60.00
Other countries: Please ask.
£1,950
| $2,592 USD | €2,235 EUR
A FINE PAIR OF IRISH PEWTER CHALICE, ...
Item Ref
P-138a
Description:
A fine pair of Irish pewter chalice of large size, with a tapering cup on a substantial stem with mid fillet with incised bands standing on a domed foot.
Circa 1750.
Literature: See D. Hall, Types of Irish Pewter, In association with the National Museum of Ireland (2005), for further illustrated examples.
Condition:
Excellent condition with a polished silver grey finish and some small traces of light oxide.
Repairs: There are no repairs that I could detect.
Size:
Height: 8.50 in (21.70cm).
Base diameter: 3.75in (9.7cm).
Top diameter: 3.375in (8.60cm).
Capacity: Approximately 1 pint.
There are no makers marks.
Shipping costs:
UK: £15.00
Europe: £30.00
USA/Canada: £45.00
Other countries: Please ask.
Stock number: P-138a.
A fine pair of Irish pewter chalice of large size, with a tapering cup on a substantial stem with mid fillet with incised bands standing on a domed foot.
Circa 1750.
Literature: See D. Hall, Types of Irish Pewter, In association with the National Museum of Ireland (2005), for further illustrated examples.
Condition:
Excellent condition with a polished silver grey finish and some small traces of light oxide.
Repairs: There are no repairs that I could detect.
Size:
Height: 8.50 in (21.70cm).
Base diameter: 3.75in (9.7cm).
Top diameter: 3.375in (8.60cm).
Capacity: Approximately 1 pint.
There are no makers marks.
Shipping costs:
UK: £15.00
Europe: £30.00
USA/Canada: £45.00
Other countries: Please ask.
Stock number: P-138a.
£1,750
| $2,326 USD | €2,006 EUR
CHARLES II PEWTER 16.75in BROAD RIM CHARGER, ...
Item Ref
P-219
Description:
Antique English pewter broad rim charger of 16.75in diameter, by Thomas Harward of St. Martin in the Fields, London; who worked 1637 - 1672.
The charger has a full set of hallmarks to the front rim. (It has also been suggested that the maker could be Richard Allen I, 1646 - 1671).
Condition:
The charger is in good condition with a lightly cleaned and polished finish to the front, the reverse has been roughly cleaned.
Repairs: There are no repairs that I could detect.
Size: 16.75 inch diameter (42.60cm).
Rim - 3.50in (9.00cm). 42.%.
Weight: TBA grams.
Pewterer's reference number:
Pewter Society: - PS4473.
Cotterell: Old Pewter: Its Makers and Marks - OP2214.
Shipping costs:
Free world wide shipping with DHL is included in the price.
Stock number: P-219.
Antique English pewter broad rim charger of 16.75in diameter, by Thomas Harward of St. Martin in the Fields, London; who worked 1637 - 1672.
The charger has a full set of hallmarks to the front rim. (It has also been suggested that the maker could be Richard Allen I, 1646 - 1671).
Condition:
The charger is in good condition with a lightly cleaned and polished finish to the front, the reverse has been roughly cleaned.
Repairs: There are no repairs that I could detect.
Size: 16.75 inch diameter (42.60cm).
Rim - 3.50in (9.00cm). 42.%.
Weight: TBA grams.
Pewterer's reference number:
Pewter Society: - PS4473.
Cotterell: Old Pewter: Its Makers and Marks - OP2214.
Shipping costs:
Free world wide shipping with DHL is included in the price.
Stock number: P-219.
£1,450
| $1,928 USD | €1,662 EUR
ANTIQUE ENGLISH PEWTER 1 GALLON ALE JUG, ...
Item Ref
P-137
Antique English pewter one gallon ale jug with large swans neck handle with heal terminal; the jug is un-lidded with a large spout. The jug has a tapering body with a mid fillet and stands on a flared and stepped foot.
There are large ownership initials AC engraved to the body along with a crowned WR verification mark, (William III ale standard).
Circa 1780.
The condition is outstanding with no damage and a fine polished silver grey finish.
There are no makers marks that I can read, although there are faint traces inside the base.
Size:
Height: 11.50in (29.0cm).
Base diameter: 8.00in (20.50cm).
Rim diameter: 6.00in (15.00cm).
Shipping costs:
UK: £15.00
Europe: £40.00
USA/Canada: £60.00
Other countries: Please ask.
Stock number: P-137.
There are large ownership initials AC engraved to the body along with a crowned WR verification mark, (William III ale standard).
Circa 1780.
The condition is outstanding with no damage and a fine polished silver grey finish.
There are no makers marks that I can read, although there are faint traces inside the base.
Size:
Height: 11.50in (29.0cm).
Base diameter: 8.00in (20.50cm).
Rim diameter: 6.00in (15.00cm).
Shipping costs:
UK: £15.00
Europe: £40.00
USA/Canada: £60.00
Other countries: Please ask.
Stock number: P-137.
£1,450
| $1,928 USD | €1,662 EUR
WILLIAM & MARY PEWTER TRIPLE REEDED 20 ...
Item Ref
P-220
Description:
Antique English pewter triple reeded charger of 20.375 inch diameter. The charger has a cast triple reeded rim and is finely hammered all over to include the rim. The reverse rim bears the hall marks of Thomas Powell of London who worked 1676 - 1715, Thomas Powell is recorded as being a prolific exporter of pewter.
Condition:
The Charger is in excellent condition with a lightly polished finish to the front, with very clearly defined hammer marks. The reverse is clean but not polished.
Repairs: There are no repairs.
Size: 20.375 inch diameter (51.40cm). The rim width is 3.00 inch (7.60cm). 29.57%.
Weight: TBC grams.
Pewterer's reference number:
Pewter Society: PS7471.
Cotterell: Old Pewter: Its Makers and Marks: OP3750.
Shipping costs:
Free world wide shipping with DHL is included in the price.
Stock number: P-220.
Antique English pewter triple reeded charger of 20.375 inch diameter. The charger has a cast triple reeded rim and is finely hammered all over to include the rim. The reverse rim bears the hall marks of Thomas Powell of London who worked 1676 - 1715, Thomas Powell is recorded as being a prolific exporter of pewter.
Condition:
The Charger is in excellent condition with a lightly polished finish to the front, with very clearly defined hammer marks. The reverse is clean but not polished.
Repairs: There are no repairs.
Size: 20.375 inch diameter (51.40cm). The rim width is 3.00 inch (7.60cm). 29.57%.
Weight: TBC grams.
Pewterer's reference number:
Pewter Society: PS7471.
Cotterell: Old Pewter: Its Makers and Marks: OP3750.
Shipping costs:
Free world wide shipping with DHL is included in the price.
Stock number: P-220.
£1,250
| $1,662 USD | €1,433 EUR
ANTIQUE ENGLISH PEWTER SPIRE FLAGON OF SMALL ...
Item Ref
P-195
Description:
A small spire flagon by Robert Iles of London, England; who worked 1691 - 1735.
The flagon is of 1quart Old English Wine Standard capacity, the tapering drum with high fillet, double-scroll 'drape-and-drop' handle, with hooded ball terminal and oval shaped escutcheon to lower attachment, chairback thumbpiece, double dome lid with elongated finial, four hallmarks and 'X' mark to rim,.
These flagon were for communion use in Churches.
A similar flagon in the Fitzwilliam Museum Collection, Cambridge, part of the Navarro bequest, [item number NAV 142-1933].
Condition:
Good condition with a smooth grey oxide finish.
Repairs: There is possibly an old repair to the base, very difficult to detect.
Size:
Height to top of finial: 10.00 in (25.50cm).
Base diameter: 4.50in (11.5cm).
Capacity: 34.6 fl.oz.
Pewterer's reference number:
Pewter Society: - PS5064.
Cotterell: Old Pewter: Its Makers and Marks - OP2522.
Shipping costs:
UK: £15.00
Europe: £30.00
USA/Canada: £50.00
Other countries: Please ask.
Stock number: P-195.
A small spire flagon by Robert Iles of London, England; who worked 1691 - 1735.
The flagon is of 1quart Old English Wine Standard capacity, the tapering drum with high fillet, double-scroll 'drape-and-drop' handle, with hooded ball terminal and oval shaped escutcheon to lower attachment, chairback thumbpiece, double dome lid with elongated finial, four hallmarks and 'X' mark to rim,.
These flagon were for communion use in Churches.
A similar flagon in the Fitzwilliam Museum Collection, Cambridge, part of the Navarro bequest, [item number NAV 142-1933].
Condition:
Good condition with a smooth grey oxide finish.
Repairs: There is possibly an old repair to the base, very difficult to detect.
Size:
Height to top of finial: 10.00 in (25.50cm).
Base diameter: 4.50in (11.5cm).
Capacity: 34.6 fl.oz.
Pewterer's reference number:
Pewter Society: - PS5064.
Cotterell: Old Pewter: Its Makers and Marks - OP2522.
Shipping costs:
UK: £15.00
Europe: £30.00
USA/Canada: £50.00
Other countries: Please ask.
Stock number: P-195.
£1,250
| $1,662 USD | €1,433 EUR
PEWTER PLAIN RIM 20.25 INCH CHARGER, BY ...
Item Ref
P-198
Description:
Antique English pewter plain rim charger of 20.25in diameter, by Thomas Templeman of Norfolk Street, The Strand, London; who worked 1667 - 1713.
The charger has a rubbed touchmark for Templeman to the reverse rim.
The front rim is engraved with a crest and ownership initials 'WA'. The are for Sir William Ashhurst or Ashurst (26 April 1647 – 12 January 1720) who was an English banker and Whig politician who sat in the English and British House of Commons between 1689 and 1710. He served as Lord Mayor of London for the year 1693 to 1694.
The reverse of the charger has old collectors information attached.
Provenance:
A Bartram collection.
Auction:
Bonhams Oxford, 21st January 2014 - lot 24.
Condition:
The charger is in excellent condition with a polished finish to the front, the reverse is unpolished with some flaking oxide.
Repairs:
There is a small split to the outer rim as can be seen in the images.
Size: 20.25 inch diameter (51.20cm).
Rim - 2.75in (7.00cm).
Weight: TBA grams.
Pewterer's reference number:
Pewter Society: - PS9297.
Cotterell: Old Pewter: Its Makers and Marks - OP4693.
Shipping costs:
Free world wide shipping with DHL is included in the price.
Stock number: P-198.
Antique English pewter plain rim charger of 20.25in diameter, by Thomas Templeman of Norfolk Street, The Strand, London; who worked 1667 - 1713.
The charger has a rubbed touchmark for Templeman to the reverse rim.
The front rim is engraved with a crest and ownership initials 'WA'. The are for Sir William Ashhurst or Ashurst (26 April 1647 – 12 January 1720) who was an English banker and Whig politician who sat in the English and British House of Commons between 1689 and 1710. He served as Lord Mayor of London for the year 1693 to 1694.
The reverse of the charger has old collectors information attached.
Provenance:
A Bartram collection.
Auction:
Bonhams Oxford, 21st January 2014 - lot 24.
Condition:
The charger is in excellent condition with a polished finish to the front, the reverse is unpolished with some flaking oxide.
Repairs:
There is a small split to the outer rim as can be seen in the images.
Size: 20.25 inch diameter (51.20cm).
Rim - 2.75in (7.00cm).
Weight: TBA grams.
Pewterer's reference number:
Pewter Society: - PS9297.
Cotterell: Old Pewter: Its Makers and Marks - OP4693.
Shipping costs:
Free world wide shipping with DHL is included in the price.
Stock number: P-198.
£950
| $1,263 USD | €1,089 EUR
ANTIQUE IRISH PEWTER CHALICE OF LARGE SIZE ...
Item Ref
P-052
Description:
Irish pewter chalice of large size, with a tapering cup on a substantial stem with mid fillet with incised bands standing on a domed foot.
Circa 1750.
Literature: See D. Hall, Types of Irish Pewter, In association with the National Museum of Ireland (2005), for further illustrated examples.
Condition:
Excellent condition with a polished silver grey finish and some small traces of light oxide.
Repairs: There are no repairs that I could detect.
Size:
Height: 8.75 in (22.00cm).
Base diameter: 3.75in (9.7cm).
Capacity: Approximately 1 pint.
There are no makers marks.
Shipping costs:
UK: £15.00
Europe: £30.00
USA/Canada: £40.00
Other countries: Please ask.
Irish pewter chalice of large size, with a tapering cup on a substantial stem with mid fillet with incised bands standing on a domed foot.
Circa 1750.
Literature: See D. Hall, Types of Irish Pewter, In association with the National Museum of Ireland (2005), for further illustrated examples.
Condition:
Excellent condition with a polished silver grey finish and some small traces of light oxide.
Repairs: There are no repairs that I could detect.
Size:
Height: 8.75 in (22.00cm).
Base diameter: 3.75in (9.7cm).
Capacity: Approximately 1 pint.
There are no makers marks.
Shipping costs:
UK: £15.00
Europe: £30.00
USA/Canada: £40.00
Other countries: Please ask.
£950
| $1,263 USD | €1,089 EUR
ANTIQUE ENGLISH PEWTER SPOUTED SPIRE FLAGON OF ...
Item Ref
P-190
Description:
A George III pewter spire flagon, circa 1790.
The flagon has a tapering straight-sided drum with a flared foot, there are reeded bands to the upper half of the drum, a double dome-lid with no finial, open chair-back thumbpiece and double-scroll handle with ball terminal. The spout has an internal fitted grill.
There are no makers marks that I can detect.
These flagon were for communion use in Churches.
Condition:
Excellent condition with a polished silver grey finish and some small traces of light oxide.
Repairs: There are no repairs that I could detect.
Size:
Height to top of thumb piece: 11.00 in (28.00cm).
Base diameter: 5.00in (12.50cm).
Shipping costs:
UK: £15.00
Europe: £35.00
USA/Canada: £50.00
Other countries: Please ask.
Stock number: P-190.
A George III pewter spire flagon, circa 1790.
The flagon has a tapering straight-sided drum with a flared foot, there are reeded bands to the upper half of the drum, a double dome-lid with no finial, open chair-back thumbpiece and double-scroll handle with ball terminal. The spout has an internal fitted grill.
There are no makers marks that I can detect.
These flagon were for communion use in Churches.
Condition:
Excellent condition with a polished silver grey finish and some small traces of light oxide.
Repairs: There are no repairs that I could detect.
Size:
Height to top of thumb piece: 11.00 in (28.00cm).
Base diameter: 5.00in (12.50cm).
Shipping costs:
UK: £15.00
Europe: £35.00
USA/Canada: £50.00
Other countries: Please ask.
Stock number: P-190.
£950
| $1,263 USD | €1,089 EUR
A FINE ANTIQUE IRISH PEWTER CHALICE, OF ...
Item Ref
P-138c
Description:
A fine antique Irish pewter chalice of large size, with a tapering cup on a substantial stem with mid fillet with incised bands standing on a domed foot.
Circa 1750.
Literature: See D. Hall, Types of Irish Pewter, In association with the National Museum of Ireland (2005), for further illustrated examples.
Condition:
Excellent condition with a polished silver grey finish and some small traces of light oxide.
Repairs: There are no repairs that I could detect.
Size:
Height: 8.50 in (21.70cm).
Base diameter: 3.75in (9.7cm).
Top diameter: 3.375in (8.60cm).
Capacity: Approximately 1 pint.
There are no makers marks.
Shipping costs:
UK: £15.00
Europe: £30.00
USA/Canada: £45.00
Other countries: Please ask.
Stock number: P-138c.
A fine antique Irish pewter chalice of large size, with a tapering cup on a substantial stem with mid fillet with incised bands standing on a domed foot.
Circa 1750.
Literature: See D. Hall, Types of Irish Pewter, In association with the National Museum of Ireland (2005), for further illustrated examples.
Condition:
Excellent condition with a polished silver grey finish and some small traces of light oxide.
Repairs: There are no repairs that I could detect.
Size:
Height: 8.50 in (21.70cm).
Base diameter: 3.75in (9.7cm).
Top diameter: 3.375in (8.60cm).
Capacity: Approximately 1 pint.
There are no makers marks.
Shipping costs:
UK: £15.00
Europe: £30.00
USA/Canada: £45.00
Other countries: Please ask.
Stock number: P-138c.
£950
| $1,263 USD | €1,089 EUR
ANTIQUE ENGLISH PEWTER TUREEN ENGRAVED WITH THE ...
Item Ref
P-200
Description:
A fine tureen of large size with a domed lid, a pair of handles all standing on four elegant splayed feet. Both the body of the tureen and the lid are engraved with the arms of The Worshipful Company of Pewterers; suggesting that this was used for table service in Pewterers Hall.
These Arms were granted to the Worshipful Company in 1533 and have remained in use until today.
This tureen is possibly unique and of some historical importance to the Worshipful Company.
Circa 1790.
Condition:
Excellent condition with a polished silver grey finish and some small traces of light oxide mainly to the underside.
Repairs: There are no repairs that I could detect.
Size:
Height: 8.00 in (20.00cm).
Width handle to handle: 14.25in (36.50cm).
Lid opening: 12.00in x 9.00in (30.50cm x 22.50cm).
There are no makers marks.
Shipping costs:
UK: £15.00
Europe: £40.00
USA/Canada: £75.00
Other countries: Please ask.
Stock number: P-200.
A fine tureen of large size with a domed lid, a pair of handles all standing on four elegant splayed feet. Both the body of the tureen and the lid are engraved with the arms of The Worshipful Company of Pewterers; suggesting that this was used for table service in Pewterers Hall.
These Arms were granted to the Worshipful Company in 1533 and have remained in use until today.
This tureen is possibly unique and of some historical importance to the Worshipful Company.
Circa 1790.
Condition:
Excellent condition with a polished silver grey finish and some small traces of light oxide mainly to the underside.
Repairs: There are no repairs that I could detect.
Size:
Height: 8.00 in (20.00cm).
Width handle to handle: 14.25in (36.50cm).
Lid opening: 12.00in x 9.00in (30.50cm x 22.50cm).
There are no makers marks.
Shipping costs:
UK: £15.00
Europe: £40.00
USA/Canada: £75.00
Other countries: Please ask.
Stock number: P-200.
£950
| $1,263 USD | €1,089 EUR
ANTIQUE ENGLISH PEWTER SPIRE FLAGON OF HALF ...
Item Ref
P-157
Description:
A George III pewter spire flagon, O.E.W.S. half-gallon, circa 1760.
The flagon has a tapering straight-sided drum with reeded foot ring, a dome-lid with baluster finial, chair-back thumbpiece and double-scroll handle with hooded-ball terminal.
There are no makers marks that I can detect.
These flagon were for communion use in Churches.
Condition:
Excellent condition with a polished silver grey finish and some small traces of light oxide.
Repairs: There are no repairs that I could detect.
Size:
Height to top of finial: 12.00 in (30.00cm).
Base diameter: 6.50in (16.00cm).
Capacity: 71.6 fl.oz.
Shipping costs:
UK: £15.00
Europe: £35.00
USA/Canada: £50.00
Other countries: Please ask.
Stock number: P-157.
A George III pewter spire flagon, O.E.W.S. half-gallon, circa 1760.
The flagon has a tapering straight-sided drum with reeded foot ring, a dome-lid with baluster finial, chair-back thumbpiece and double-scroll handle with hooded-ball terminal.
There are no makers marks that I can detect.
These flagon were for communion use in Churches.
Condition:
Excellent condition with a polished silver grey finish and some small traces of light oxide.
Repairs: There are no repairs that I could detect.
Size:
Height to top of finial: 12.00 in (30.00cm).
Base diameter: 6.50in (16.00cm).
Capacity: 71.6 fl.oz.
Shipping costs:
UK: £15.00
Europe: £35.00
USA/Canada: £50.00
Other countries: Please ask.
Stock number: P-157.
£900
| $1,196 USD | €1,032 EUR
ANTIQUE GUERNSEY 1 QUART LIDDED FLAGON.
Item Ref
P-009
Antique Guernsey flagon of 1 quart capacity, heart shaped lid with twin acorn thumb piece.
The flagon is in excellent condition with a polished silver grey finish.
Circa 1750.
Size:
Height: 9.00 in (23cm)
Shipping costs:
UK: £10.00
Europe: £20.00
USA/Canada: £30.00
Other countries: Please ask.
Stock number: P-009.
The flagon is in excellent condition with a polished silver grey finish.
Circa 1750.
Size:
Height: 9.00 in (23cm)
Shipping costs:
UK: £10.00
Europe: £20.00
USA/Canada: £30.00
Other countries: Please ask.
Stock number: P-009.
£895
| $1,190 USD | €1,026 EUR
ANTIQUE ENGLISH PEWTER 22in PLAIN RIM CHARGER, ...
Item Ref
P-106
Description:
Antique English pewter plain rim charger of large size by Stynt Duncomb of Bewdley, Worcestershire, England. Who worked 1745-1767. The charger is of large size being 22in in diameter, a heavy and well made charger. There is a good set of makers touchmarks to the reverse rim along with a Crowned X, London label, a complete set of hallmarks and ownership initials 'crowned BR'.... all very well marked.
Condition:
The charger is in excellent condition with a clean polished finish to the front, there are some knife marks to the front showing signs of use. The reverse is unpolished with a light oxide finish.
Repairs: There are no repairs that I could detect.
Size: 22.00 inch diameter (55.00cm).
Weight: TBA grams.
Pewterer's reference number:
Pewter Society: - PS76.
Cotterell: Old Pewter: Its Makers and Marks - OP1466.
Shipping costs:
UK: £20.00
Europe: £60.00
USA/Canada: £100.00
Other countries: Please ask.
Stock number: P-106.
Antique English pewter plain rim charger of large size by Stynt Duncomb of Bewdley, Worcestershire, England. Who worked 1745-1767. The charger is of large size being 22in in diameter, a heavy and well made charger. There is a good set of makers touchmarks to the reverse rim along with a Crowned X, London label, a complete set of hallmarks and ownership initials 'crowned BR'.... all very well marked.
Condition:
The charger is in excellent condition with a clean polished finish to the front, there are some knife marks to the front showing signs of use. The reverse is unpolished with a light oxide finish.
Repairs: There are no repairs that I could detect.
Size: 22.00 inch diameter (55.00cm).
Weight: TBA grams.
Pewterer's reference number:
Pewter Society: - PS76.
Cotterell: Old Pewter: Its Makers and Marks - OP1466.
Shipping costs:
UK: £20.00
Europe: £60.00
USA/Canada: £100.00
Other countries: Please ask.
Stock number: P-106.
£750
| $997 USD | €860 EUR
ANTIQUR JERSEY PEWTER 1 QUART MEASURE BY ...
Item Ref
P-007
Antique Jersey flagon of 1 quart capacity, heart shaped lid with twin acorn thumb piece.
There is a clear maker’s mark to the outside of the lid for John de St. Croix. There is a clear ‘Crowned GR’ verification to the rim.
The flagon is in excellent condition with a unpolished grey finish. There are some historic knocks and bumps.
Circa 1750.
Size:
Height: 8.50 in (21.5cm)
Shipping costs:
UK: £10.00
Europe: £20.00
USA/Canada: £30.00
Other countries: Please ask.
Stock number: P-007.
There is a clear maker’s mark to the outside of the lid for John de St. Croix. There is a clear ‘Crowned GR’ verification to the rim.
The flagon is in excellent condition with a unpolished grey finish. There are some historic knocks and bumps.
Circa 1750.
Size:
Height: 8.50 in (21.5cm)
Shipping costs:
UK: £10.00
Europe: £20.00
USA/Canada: £30.00
Other countries: Please ask.
Stock number: P-007.
£695
| $924 USD | €797 EUR
ANTIQUE ENGLISH PEWTER 20in MULTIPLE REEDED CHARGER ...
Item Ref
P-146
Description:
Antique English pewter triple reeded charger of 20.25 inch diameter, by John Barlow of Derby, England, who worked 1698 - 1744. There are ownership initials 'EW' to the front rim along with a clear set of hall marks. The reverse rim has a very faint partial touch mark and London label.
John Barlow was apprenticed to George Smith and it is thought that this charger was cast using one of George Smiths moulds.
Condition:
The charger is in excellent condition with a polished finish to the front, there are some knife marks to the front showing signs of use. The reverse is unpolished but has been cleaned.
Repairs: There are one or two very small old repairs that are only slightly visible on the reverse and not visible on the face.
Size: 20.25 inch diameter (51.80cm).
Weight: 2990 grams.
Pewterer's reference number:
Pewter Society: - PS447.
Cotterell: Old Pewter: Its Makers and Marks - OP256.
Shipping costs:
UK: £15.00
Europe: £35.00
USA/Canada: £70.00
Other countries: Please ask.
Stock number: P-146.
Antique English pewter triple reeded charger of 20.25 inch diameter, by John Barlow of Derby, England, who worked 1698 - 1744. There are ownership initials 'EW' to the front rim along with a clear set of hall marks. The reverse rim has a very faint partial touch mark and London label.
John Barlow was apprenticed to George Smith and it is thought that this charger was cast using one of George Smiths moulds.
Condition:
The charger is in excellent condition with a polished finish to the front, there are some knife marks to the front showing signs of use. The reverse is unpolished but has been cleaned.
Repairs: There are one or two very small old repairs that are only slightly visible on the reverse and not visible on the face.
Size: 20.25 inch diameter (51.80cm).
Weight: 2990 grams.
Pewterer's reference number:
Pewter Society: - PS447.
Cotterell: Old Pewter: Its Makers and Marks - OP256.
Shipping costs:
UK: £15.00
Europe: £35.00
USA/Canada: £70.00
Other countries: Please ask.
Stock number: P-146.
£695
| $924 USD | €797 EUR
ANTIQUE JERSEY PEWTER MEASURE, 1 POT CAPACITY, ...
Item Ref
P-006
Antique Jersey flagon of 1 Pot capacity, heart shaped lid with twin acorn thumb piece.
There is a clear maker’s mark to the underside of the lid for John de St. Croix. There is a clear ‘Crowned GR’ verification to the rim.
The flagon is in excellent condition with a polished silver grey finish. There are a few historic knocks and bumps.
Circa 1750.
Size:
Height: 10.75 in (27cm)
Shipping costs:
UK: £10.00
Europe: £20.00
USA/Canada: £30.00
Other countries: Please ask.
Stock number: P-006.
There is a clear maker’s mark to the underside of the lid for John de St. Croix. There is a clear ‘Crowned GR’ verification to the rim.
The flagon is in excellent condition with a polished silver grey finish. There are a few historic knocks and bumps.
Circa 1750.
Size:
Height: 10.75 in (27cm)
Shipping costs:
UK: £10.00
Europe: £20.00
USA/Canada: £30.00
Other countries: Please ask.
Stock number: P-006.
£650
| $864 USD | €745 EUR
ANTIQUE ENGLISH PEWTER 18 3/16 IN CHARGER, ...
Item Ref
P-016
Description:
Antique English pewter charger of 18 3/16 inch diameter with cast and incised rim, there would appear to be a single cast rim with two incised lines inside of this. The surface of the bowl and rim is hammered all over as was typical of items made for export especially to Sweden. There is a set of rubbed hallmarks to the rim, the fourth hall mark contains the makers initials. To the rear of the rim are two touchmarks, the word 'London' can be made out along with a 'rose and crown'. The back rim also has some ownership initials scratched and punch engraved to include 'BJM', 'NB' and 'MT'.
Condition:
The plate is in fair condition with a polished finish to the front, with traces of oxide in some of the hammer marks. The reverse is also lightly polished with some light oxide.
Repairs: There are numerous old repairs especially on the revers where the rim joins the booge.
Size: 18.187 inch diameter (46.20cm). The rim width is 2.750 inch (6.80cm) 29.50%.
Weight: 2050 grams.
Pewterer's reference number:
Pewter Society: ?.
Cotterell: Old Pewter: Its Makers and Marks: ?.
Provenance:
Ex Jan Gadd Collection.
Shipping costs:
UK: £15.00
Europe: £40.00
USA/Canada: £80.00
Other countries: Please ask.
Stock number: P-016.
Antique English pewter charger of 18 3/16 inch diameter with cast and incised rim, there would appear to be a single cast rim with two incised lines inside of this. The surface of the bowl and rim is hammered all over as was typical of items made for export especially to Sweden. There is a set of rubbed hallmarks to the rim, the fourth hall mark contains the makers initials. To the rear of the rim are two touchmarks, the word 'London' can be made out along with a 'rose and crown'. The back rim also has some ownership initials scratched and punch engraved to include 'BJM', 'NB' and 'MT'.
Condition:
The plate is in fair condition with a polished finish to the front, with traces of oxide in some of the hammer marks. The reverse is also lightly polished with some light oxide.
Repairs: There are numerous old repairs especially on the revers where the rim joins the booge.
Size: 18.187 inch diameter (46.20cm). The rim width is 2.750 inch (6.80cm) 29.50%.
Weight: 2050 grams.
Pewterer's reference number:
Pewter Society: ?.
Cotterell: Old Pewter: Its Makers and Marks: ?.
Provenance:
Ex Jan Gadd Collection.
Shipping costs:
UK: £15.00
Europe: £40.00
USA/Canada: £80.00
Other countries: Please ask.
Stock number: P-016.
£595
| $791 USD | €682 EUR
Antique English Pewter 20in Triple Reeded Charger, ...
Item Ref
P-008
Description:
Antique English pewter triple reeded charger of 20.375 inch diameter, by Nehemiah Cloudesley of Leeds, England, who worked 1689 - 1714. There are punched ownership initials 'ID' to the front rim along with a clear set of well struck hall marks. The reverse of the charger bears two rubbed touchmarks for Cloudesley. There is a fine incised line to the bowl of the charger and the booge is very well hammered.
Condition:
The charger is in good condition with a lightly polished finish to the front with some light oxide, there are some knife marks to the front showing signs of use. The reverse is also lightly polished with traces of oxide. There is one old rim crack that can be seen in the images.
Repairs: There are no repairs.
Size: 20.375 inch diameter (51.80cm). Rim 2.75in (6.80cm). 26.25%.
Weight: 3075 grams.
Pewterer's reference number:
Pewter Society: - PS1762.
Cotterell: Old Pewter: Its Makers and Marks - OP991.
A semi-broad rim of the same size is in the Neish Collection at the Smith Art Gallery and Museum at Stirling.
Shipping costs:
UK: £15.00
Europe: £35.00
USA/Canada: £70.00
Other countries: Please ask.
Stock number: P-008.
Antique English pewter triple reeded charger of 20.375 inch diameter, by Nehemiah Cloudesley of Leeds, England, who worked 1689 - 1714. There are punched ownership initials 'ID' to the front rim along with a clear set of well struck hall marks. The reverse of the charger bears two rubbed touchmarks for Cloudesley. There is a fine incised line to the bowl of the charger and the booge is very well hammered.
Condition:
The charger is in good condition with a lightly polished finish to the front with some light oxide, there are some knife marks to the front showing signs of use. The reverse is also lightly polished with traces of oxide. There is one old rim crack that can be seen in the images.
Repairs: There are no repairs.
Size: 20.375 inch diameter (51.80cm). Rim 2.75in (6.80cm). 26.25%.
Weight: 3075 grams.
Pewterer's reference number:
Pewter Society: - PS1762.
Cotterell: Old Pewter: Its Makers and Marks - OP991.
A semi-broad rim of the same size is in the Neish Collection at the Smith Art Gallery and Museum at Stirling.
Shipping costs:
UK: £15.00
Europe: £35.00
USA/Canada: £70.00
Other countries: Please ask.
Stock number: P-008.
£495
| $658 USD | €567 EUR
ANTIQUE ENGLISH PEWTER 16 1/2 IN MULTIPLE ...
Item Ref
P-005
Description:
Antique English pewter dish with a multiple reeded cast rim, of 16.50 inch diameter, by Edward Leapidge I of London, England, who worked from 1699 -1728. There is a marriage triad 'B over MM' to the front rim along with a partial rubbed set of hall marks. The reverse rim has two partial rubbed touch marks and a London label.
This is a very well made dish with a very good cast rim.
Condition:
The dish is in excellent condition with a lightly polished finish to the front, there are some knife marks to the front showing signs of use. The reverse is also polished.
Repairs: There are no repairs that could be detected.
Size: 16.50 inch diameter (42.00cm).
Weight:
Pewterer's reference number:
Pewter Society: - PS5784.
Cotterell: Old Pewter: Its Makers and Marks - OP2893.
Shipping costs:
UK: £15.00
Europe: £35.00
USA/Canada: £70.00
Other countries: Please ask.
Stock number: P-005.
Antique English pewter dish with a multiple reeded cast rim, of 16.50 inch diameter, by Edward Leapidge I of London, England, who worked from 1699 -1728. There is a marriage triad 'B over MM' to the front rim along with a partial rubbed set of hall marks. The reverse rim has two partial rubbed touch marks and a London label.
This is a very well made dish with a very good cast rim.
Condition:
The dish is in excellent condition with a lightly polished finish to the front, there are some knife marks to the front showing signs of use. The reverse is also polished.
Repairs: There are no repairs that could be detected.
Size: 16.50 inch diameter (42.00cm).
Weight:
Pewterer's reference number:
Pewter Society: - PS5784.
Cotterell: Old Pewter: Its Makers and Marks - OP2893.
Shipping costs:
UK: £15.00
Europe: £35.00
USA/Canada: £70.00
Other countries: Please ask.
Stock number: P-005.
£495
| $658 USD | €567 EUR
ANTIQUE ENGLISH PEWTER GEORGE II FLAT-LID FLAGON, ...
Item Ref
P-320
The flagon has a tapering drum with flared base and incised lines above. There is a bold mid-fillet and fine incised lines below the collar, a flat lid with locating flange to the underside, twin-lobed thumbpiece, and solid curved handle.
There are no visible maker's marks, the the flagon is identical in style to those attributed to William Eddon, London (fl.1690-1747), (PS3067),
Circa 1720-30.
There are no makers marks that I can find.
Condition:
good condition with a very lightly polished silver grey finish and some traces of light oxide. There are a few historic small dents to the drum and foot.
Repairs: There is an old repair to the underside of the lid where attached to the thumbpiece.
(The condition and old repair is reflected in the price).
Size:
Height to top of thumbpiece: 23.5cm (9¼in).
Base diameter: 6.25in (15.7cm).
capacity 60 fl.oz., height
Stock number: P-320.
Shipping costs:
UK: £15.00
Europe: £30.00
USA/Canada: £50.00
Other countries: Please ask.
There are no visible maker's marks, the the flagon is identical in style to those attributed to William Eddon, London (fl.1690-1747), (PS3067),
Circa 1720-30.
There are no makers marks that I can find.
Condition:
good condition with a very lightly polished silver grey finish and some traces of light oxide. There are a few historic small dents to the drum and foot.
Repairs: There is an old repair to the underside of the lid where attached to the thumbpiece.
(The condition and old repair is reflected in the price).
Size:
Height to top of thumbpiece: 23.5cm (9¼in).
Base diameter: 6.25in (15.7cm).
capacity 60 fl.oz., height
Stock number: P-320.
Shipping costs:
UK: £15.00
Europe: £30.00
USA/Canada: £50.00
Other countries: Please ask.
£495
| $658 USD | €567 EUR
ANTIQUE SCOTTISH PEWTER CRESTED TAPPIT HEN, SCOT'S ...
Item Ref
P-319
A good example of a Scottish pewter crested tappit hen of 'Scots Pint' capacity.
The tappit hen is of typical shouldered form with multiple incised bands to the shouldered body which stands on a foot rim with incised banding above. The domed lid has an acorn knop and erect thumb piece. There is a plouk inside the top, capacity to this point is 60floz. There are very good linen marks where the handle joins the body and on the lid.
Condition:
Excellent condition with a lightly polished silver grey finish and some small traces of light oxide. The are a few age related knocks as one would expect.
Repairs: There are no repairs that I could detect.
Size:
Height to top of knop: 12.00 in (30.00cm).
Base diameter: 5.00in (12.70cm).
Capacity: 60.00floz, Scottish Pint.
Weight: 1175 grams.
Shipping costs:
UK: £15.00
Europe: £35.00
USA/Canada: £50.00
Other countries: Please ask.
Stock number: P-319.
The tappit hen is of typical shouldered form with multiple incised bands to the shouldered body which stands on a foot rim with incised banding above. The domed lid has an acorn knop and erect thumb piece. There is a plouk inside the top, capacity to this point is 60floz. There are very good linen marks where the handle joins the body and on the lid.
Condition:
Excellent condition with a lightly polished silver grey finish and some small traces of light oxide. The are a few age related knocks as one would expect.
Repairs: There are no repairs that I could detect.
Size:
Height to top of knop: 12.00 in (30.00cm).
Base diameter: 5.00in (12.70cm).
Capacity: 60.00floz, Scottish Pint.
Weight: 1175 grams.
Shipping costs:
UK: £15.00
Europe: £35.00
USA/Canada: £50.00
Other countries: Please ask.
Stock number: P-319.
£495
| $658 USD | €567 EUR
ANTIQUE ENGLISH PEWTER MULTIPLE REEDED PLATE, BY ...
Item Ref
P-172
Description:
Antique English pewter multiple reeded plate of 8.50 inch diameter with four diamond shaped 'fleur-de-lys' hallmarks to the front rim along with the marriage triad 'IWA'. The reverse has a faint touchmark which merits further study; along with an old collectors label.
The hallmarks are attributed to an unknown maker 'TM' but the Worshipful Company: History and Catalogue, 1968, p22, item 49, suggests these could be the marks of Robert Moulins II.
Condition:
The plate is in excellent condition with a very lightly polished finish to the front, with some small traces of oxide. The reverse is also lightly polished with some light oxide.
Repairs: There are no repairs.
Size: 8.50 inch diameter (21.60cm).
Pewterer's reference number:
Pewter Society: 'TM' PS6682, Robert Moulins II, PS6481.
Cotterell: Old Pewter: Its Makers and Marks: Robert Moulins II OP3260.
Shipping costs:
UK: £15.00
Europe: £30.00
USA/Canada: £40.00
Other countries: Please ask.
Stock number: P-172.
Antique English pewter multiple reeded plate of 8.50 inch diameter with four diamond shaped 'fleur-de-lys' hallmarks to the front rim along with the marriage triad 'IWA'. The reverse has a faint touchmark which merits further study; along with an old collectors label.
The hallmarks are attributed to an unknown maker 'TM' but the Worshipful Company: History and Catalogue, 1968, p22, item 49, suggests these could be the marks of Robert Moulins II.
Condition:
The plate is in excellent condition with a very lightly polished finish to the front, with some small traces of oxide. The reverse is also lightly polished with some light oxide.
Repairs: There are no repairs.
Size: 8.50 inch diameter (21.60cm).
Pewterer's reference number:
Pewter Society: 'TM' PS6682, Robert Moulins II, PS6481.
Cotterell: Old Pewter: Its Makers and Marks: Robert Moulins II OP3260.
Shipping costs:
UK: £15.00
Europe: £30.00
USA/Canada: £40.00
Other countries: Please ask.
Stock number: P-172.
£450
| $598 USD | €516 EUR
ANTIQUE ENGLISH PEWTER 1 PINT DOME LID ...
Item Ref
P-199
A fine antique English pewter lidded tankard of 20 fluid ounce capacity, by Burgum & Catcott of Bristol, Cott O.P 708.
The Tankard is of ‘tulip’ form, with double dome lid and an solid scroll thumb piece, single scroll handle with fish tail terminal.
The inside base is struck with a makers maker’s touch mark.
The tankard is in excellent condition with a polished silver grey finish.
Circa 1770.
Size:
Height: 6.0 in (15.0cm).
Shipping costs:
UK: £15.00
Europe: £25.00
USA/Canada: £40.00
Other countries: Please ask.
The Tankard is of ‘tulip’ form, with double dome lid and an solid scroll thumb piece, single scroll handle with fish tail terminal.
The inside base is struck with a makers maker’s touch mark.
The tankard is in excellent condition with a polished silver grey finish.
Circa 1770.
Size:
Height: 6.0 in (15.0cm).
Shipping costs:
UK: £15.00
Europe: £25.00
USA/Canada: £40.00
Other countries: Please ask.
£395
| $525 USD | €453 EUR
ANTIQUE SWISS PEWTER 'BIBERON' WATER DRINKING VESSEL, ...
Item Ref
P-285
Description:
A scarce example of a Swiss pewter 'biberon'; these were usually hung from a bracket on the wall in a Swiss farmhouse kitchen, they contained the clean fresh drinking water for the family, the water would be drawn through the spout on the front. This fine example has bears head castings to the spout and where the swing handle joins the body.
Circa 1730.
Literature: See H H Cotterell; National Types of Old Pewter, page 64 for a discussion and images of biberon's.
Condition:
Excellent condition with a polished silver grey finish and some small traces of light oxide.
Repairs: There are no repairs that I could detect.
Size:
Height: 6.50 in (16.50cm).
Base diameter: 5.00in (12.50cm).
Capacity: Approximately 1 litre.
There are no makers marks.
Shipping costs:
UK: £15.00
Europe: £35.00
USA/Canada: £50.00
Other countries: Please ask.
Stock number: P-285.
A scarce example of a Swiss pewter 'biberon'; these were usually hung from a bracket on the wall in a Swiss farmhouse kitchen, they contained the clean fresh drinking water for the family, the water would be drawn through the spout on the front. This fine example has bears head castings to the spout and where the swing handle joins the body.
Circa 1730.
Literature: See H H Cotterell; National Types of Old Pewter, page 64 for a discussion and images of biberon's.
Condition:
Excellent condition with a polished silver grey finish and some small traces of light oxide.
Repairs: There are no repairs that I could detect.
Size:
Height: 6.50 in (16.50cm).
Base diameter: 5.00in (12.50cm).
Capacity: Approximately 1 litre.
There are no makers marks.
Shipping costs:
UK: £15.00
Europe: £35.00
USA/Canada: £50.00
Other countries: Please ask.
Stock number: P-285.
£395
| $525 USD | €453 EUR
ANTIQUE ENGLISH PEWTER TRIPLE REEDED PLATE BY ...
Item Ref
P-323
Description:
Antique English pewter triple reeded plate of 8.50 inch diameter. The front rim bears a very well struck set of hall marks for John Tubb of London who worked from 1686, these are of note as Tubb was one of a small group of Pewterer's who incorporated 'black letters' into their hallmarks, (see Journal of the Pewter Society, Autumn 1997 p32). The reverse has a partial set of touchmarks for John Tubb.
Condition:
The plate is in excellent condition with a very lightly polished finish to the front, with some small traces of oxide. The reverse is also lightly polished with some light oxide.
Repairs: There are no repairs.
Size: 8.50 inch diameter (21.50cm).
Pewterer's reference number:
Pewter Society: PS9502.
Cotterell: Old Pewter: Its Makers and Marks: OP4821.
Shipping costs:
UK: £15.00
Europe: £30.00
USA/Canada: £40.00
Other countries: Please ask.
Stock number: P-323.
Antique English pewter triple reeded plate of 8.50 inch diameter. The front rim bears a very well struck set of hall marks for John Tubb of London who worked from 1686, these are of note as Tubb was one of a small group of Pewterer's who incorporated 'black letters' into their hallmarks, (see Journal of the Pewter Society, Autumn 1997 p32). The reverse has a partial set of touchmarks for John Tubb.
Condition:
The plate is in excellent condition with a very lightly polished finish to the front, with some small traces of oxide. The reverse is also lightly polished with some light oxide.
Repairs: There are no repairs.
Size: 8.50 inch diameter (21.50cm).
Pewterer's reference number:
Pewter Society: PS9502.
Cotterell: Old Pewter: Its Makers and Marks: OP4821.
Shipping costs:
UK: £15.00
Europe: £30.00
USA/Canada: £40.00
Other countries: Please ask.
Stock number: P-323.
£395
| $525 USD | €453 EUR
ANTIQUE ENGLISH PEWTER PLATE WITH SCARCE INCISED ...
Item Ref
P-322
Description:
Antique English pewter plate of 8.875 inch diameter with scarce incised rim. The front rim bears a very well struck set of hall marks for John Trapp II of Worcester who worked from 1677 - 1707, The reverse has a partial set of touchmarks for John Trapp II.
This plate is of particular interest due to the fine incised lines around the outer rim, this is an unusual and scarce feature.
Condition:
The plate is in excellent condition with a very lightly polished finish to the front, with some small traces of oxide. The reverse is also lightly polished with some light oxide.
Repairs: There are no repairs.
Size: 8.875 inch diameter (22.00cm).
Pewterer's reference number:
Pewter Society: PS9547.
Cotterell: Old Pewter: Its Makers and Marks: OP5977.
Shipping costs:
UK: £15.00
Europe: £30.00
USA/Canada: £40.00
Other countries: Please ask.
Stock number: P-322.
Antique English pewter plate of 8.875 inch diameter with scarce incised rim. The front rim bears a very well struck set of hall marks for John Trapp II of Worcester who worked from 1677 - 1707, The reverse has a partial set of touchmarks for John Trapp II.
This plate is of particular interest due to the fine incised lines around the outer rim, this is an unusual and scarce feature.
Condition:
The plate is in excellent condition with a very lightly polished finish to the front, with some small traces of oxide. The reverse is also lightly polished with some light oxide.
Repairs: There are no repairs.
Size: 8.875 inch diameter (22.00cm).
Pewterer's reference number:
Pewter Society: PS9547.
Cotterell: Old Pewter: Its Makers and Marks: OP5977.
Shipping costs:
UK: £15.00
Europe: £30.00
USA/Canada: £40.00
Other countries: Please ask.
Stock number: P-322.
£395
| $525 USD | €453 EUR
ANTIQUE ENGLISH PEWTER TRIPLE REEDED PLATE, OXFORD ...
Item Ref
P-063
Description:
Antique English pewter triple reeded plate of 9.375 inch (23.80cm) diameter. The front rim bears a well struck set of hall marks for maker 'IM' of Oxford who worked circa 1680. The reverse bears a partial touchmark containing the initial 'IP' along with a marriage triad 'HMM'. Further research may enable the exact maker to be identified.
The hallmarks are attributed to the following possible makers:
'IM' PS6668 worked 1670 - 1710.
Tobias (Toby) Payne PS7088 worked 1690 - 1739.
The touch mark with initials 'IP' could be connected to John Payne of Oxford, who worked 1682 - 1687, the father of Tobias Payne.
Condition:
The plate is in excellent condition with a lightly polished finish to the front, with some small traces of oxide. The reverse is un-polished with some light oxide.
Repairs: There is a very small old repair to the reverse rim / well, very difficult to detect..
Size: 9.375 inch diameter (23.80cm).
Weight: 383 grams.
Pewterer's reference number:
Pewter Society: PS6668.
Cotterell: Old Pewter: Its Makers and Marks: -.
Shipping costs:
UK: £15.00
Europe: £30.00
USA/Canada: £45.00
Other countries: Please ask.
Stock number: P-063.
Antique English pewter triple reeded plate of 9.375 inch (23.80cm) diameter. The front rim bears a well struck set of hall marks for maker 'IM' of Oxford who worked circa 1680. The reverse bears a partial touchmark containing the initial 'IP' along with a marriage triad 'HMM'. Further research may enable the exact maker to be identified.
The hallmarks are attributed to the following possible makers:
'IM' PS6668 worked 1670 - 1710.
Tobias (Toby) Payne PS7088 worked 1690 - 1739.
The touch mark with initials 'IP' could be connected to John Payne of Oxford, who worked 1682 - 1687, the father of Tobias Payne.
Condition:
The plate is in excellent condition with a lightly polished finish to the front, with some small traces of oxide. The reverse is un-polished with some light oxide.
Repairs: There is a very small old repair to the reverse rim / well, very difficult to detect..
Size: 9.375 inch diameter (23.80cm).
Weight: 383 grams.
Pewterer's reference number:
Pewter Society: PS6668.
Cotterell: Old Pewter: Its Makers and Marks: -.
Shipping costs:
UK: £15.00
Europe: £30.00
USA/Canada: £45.00
Other countries: Please ask.
Stock number: P-063.
£350
| $465 USD | €401 EUR
ANTIQUE ENGLISH PEWTER PORRINGER OF 16 FLOZ ...
Item Ref
P-075
Antique English pewter porringer of 16 fluid ounce capacity (1 pint to the Old English Wine Standard). The porringer has a bossed base and an attractive 'ear' handle. There are good turning marks to the underside.
Circa 1700.
The condition is excellent with a fine polished silver grey finish.
There are no makers marks.
Size:
Bowl diameter: 5.00in (12.5cm).
Depth: 1.75in (4.50cm).
Capacity: 16 floz, 1 pint OEWS.
Shipping costs:
UK: £15.00
Europe: £30.00
USA/Canada: £40.00
Other countries: Please ask.
Stock number: P-075.
Circa 1700.
The condition is excellent with a fine polished silver grey finish.
There are no makers marks.
Size:
Bowl diameter: 5.00in (12.5cm).
Depth: 1.75in (4.50cm).
Capacity: 16 floz, 1 pint OEWS.
Shipping costs:
UK: £15.00
Europe: £30.00
USA/Canada: £40.00
Other countries: Please ask.
Stock number: P-075.
£350
| $465 USD | €401 EUR
ANTIQUE ENGLISH PEWTER PORRINGER OF 12 FLOZ ...
Item Ref
P-076
Antique English pewter porringer of 12 fluid ounce capacity (3/4 pint to the Old English Wine Standard). The porringer has a bossed base and an attractive 'ear' handle. There are good turning marks to the underside.
Circa 1700.
The condition is excellent with a fine polished silver grey finish, there is a small old repair to the inside of the bowl.
There are no makers marks.
Size:
Bowl diameter: 4.25in (11.0cm).
Depth: 1.50in (4.00cm).
Capacity: 12 floz, 3/4 pint OEWS.
Shipping costs:
UK: £15.00
Europe: £30.00
USA/Canada: £40.00
Other countries: Please ask.
Stock number: P-076.
Circa 1700.
The condition is excellent with a fine polished silver grey finish, there is a small old repair to the inside of the bowl.
There are no makers marks.
Size:
Bowl diameter: 4.25in (11.0cm).
Depth: 1.50in (4.00cm).
Capacity: 12 floz, 3/4 pint OEWS.
Shipping costs:
UK: £15.00
Europe: £30.00
USA/Canada: £40.00
Other countries: Please ask.
Stock number: P-076.
£350
| $465 USD | €401 EUR
ANTIQUE GUERNSEY PEWTER 1 PINT LIDDED FLAGON ...
Item Ref
P-060
Antique Guernsey flagon of 1 pint capacity, heart shaped lid with twin acorn thumb piece. This style of flagon is know as 'type 1'.
The lid bears the rubbed touchmarks and London label of Carter, who worked 1730-1770. It is thought that Carter was a Cornishman working in either Cornwall or London. There are also ownership initials 'NB' stamped on the lid.
The flagon is in excellent condition with a polished silver grey finish, note the clear linen mark on the inside where the top of the handle joins the body.
Circa 1750.
Size:
Height: 7.00 in (18.00cm).
Base diameter: 3.625in (8.50cm).
Shipping costs:
UK: £12.00
Europe: £30.00
USA/Canada: £40.00
Other countries: Please ask.
Stock number: P-060.
The lid bears the rubbed touchmarks and London label of Carter, who worked 1730-1770. It is thought that Carter was a Cornishman working in either Cornwall or London. There are also ownership initials 'NB' stamped on the lid.
The flagon is in excellent condition with a polished silver grey finish, note the clear linen mark on the inside where the top of the handle joins the body.
Circa 1750.
Size:
Height: 7.00 in (18.00cm).
Base diameter: 3.625in (8.50cm).
Shipping costs:
UK: £12.00
Europe: £30.00
USA/Canada: £40.00
Other countries: Please ask.
Stock number: P-060.
£250
| $332 USD | €287 EUR
ANTIQUE JERSEY PEWTER LIDLESS MEASURE OF 'NOGGIN' ...
Item Ref
P-059
A fine antique Jersey pewter lidless measure of 'noggin capacity.
The collar is struck to the right of the handle with ‘crown GR’ capacity mark of 'type C' used 1790 - 1830.
The handle is of 'type a' with a 'blind' hinge boss.
The measure is in excellent condition with a lightly polished silver grey finish.
There are no makers marks.
Circa 1800.
Size:
Height: 4.00in (10.0cm).
Base diameter: 2.00in (5.00cm).
Capacity: about 4.40 floz.
Shipping costs:
UK: £12.00
Europe: £30.00
USA/Canada: £40.00
Other countries: Please ask.
Stock number: P-059.
The collar is struck to the right of the handle with ‘crown GR’ capacity mark of 'type C' used 1790 - 1830.
The handle is of 'type a' with a 'blind' hinge boss.
The measure is in excellent condition with a lightly polished silver grey finish.
There are no makers marks.
Circa 1800.
Size:
Height: 4.00in (10.0cm).
Base diameter: 2.00in (5.00cm).
Capacity: about 4.40 floz.
Shipping costs:
UK: £12.00
Europe: £30.00
USA/Canada: £40.00
Other countries: Please ask.
Stock number: P-059.
£195
| $259 USD | €224 EUR
ANTIQUE JERSEY PEWTER LIDLESS MEASURE OF 'NOGGIN' ...
Item Ref
P-070
A fine antique Jersey pewter lidless measure of 'noggin capacity.
The handle is of 'type b' style.
The measure is in excellent condition with a lightly polished silver grey finish.
There are no makers marks or verification marks.
Circa 1800.
Size:
Height: 3.75in (9.5cm).
Base diameter: 2.25in (5.50cm).
Capacity: about 4.40 floz.
Provenance:
Carl Ricketts collection.
Shipping costs:
UK: £12.00
Europe: £30.00
USA/Canada: £40.00
Other countries: Please ask.
Stock number: P-070.
The handle is of 'type b' style.
The measure is in excellent condition with a lightly polished silver grey finish.
There are no makers marks or verification marks.
Circa 1800.
Size:
Height: 3.75in (9.5cm).
Base diameter: 2.25in (5.50cm).
Capacity: about 4.40 floz.
Provenance:
Carl Ricketts collection.
Shipping costs:
UK: £12.00
Europe: £30.00
USA/Canada: £40.00
Other countries: Please ask.
Stock number: P-070.
£150
| $199 USD | €172 EUR
ANTIQUE ENGLISH PEWTER PLAIN RIM PLATE BY ...
Item Ref
P-136
Description:
Antique English pewter rim plate of 8.875 inch (22.60cm) diameter. The reverse bears an excellent set of touchmarks for Humphrey Evans II of Exeter, Devon, England. The plate is ex the collections of Ron Homer and Tony Chapman.
Condition:
The plate is in excellent condition with a lightly polished finish to the front, with some small traces of oxide. The reverse is un-polished with some light oxide.
Repairs: There are none that I could detect.
Size: 8.875 inch diameter (22.60cm).
Weight:
Pewterer's reference number:
Pewter Society: PS3183.
Cotterell: Old Pewter: Its Makers and Marks: OP1586.
Provenance:
Ex Homer collection #362. Sold Bonhams, Chester 13th/14th May 2009, as part of lot 753.
Ex Chapman collection #017.
Shipping costs:
UK: £15.00
Europe: £30.00
USA/Canada: £45.00
Other countries: Please ask.
Stock number: P-136.
Antique English pewter rim plate of 8.875 inch (22.60cm) diameter. The reverse bears an excellent set of touchmarks for Humphrey Evans II of Exeter, Devon, England. The plate is ex the collections of Ron Homer and Tony Chapman.
Condition:
The plate is in excellent condition with a lightly polished finish to the front, with some small traces of oxide. The reverse is un-polished with some light oxide.
Repairs: There are none that I could detect.
Size: 8.875 inch diameter (22.60cm).
Weight:
Pewterer's reference number:
Pewter Society: PS3183.
Cotterell: Old Pewter: Its Makers and Marks: OP1586.
Provenance:
Ex Homer collection #362. Sold Bonhams, Chester 13th/14th May 2009, as part of lot 753.
Ex Chapman collection #017.
Shipping costs:
UK: £15.00
Europe: £30.00
USA/Canada: £45.00
Other countries: Please ask.
Stock number: P-136.
£145
| $193 USD | €166 EUR
ANTIQUE ENGLISH PEWTER 1 PINT MEASURE BY ...
Item Ref
P-244
Description:
A good one pint measure, by Thomas Phillips I of London, England who worked 1795 - 1849.
The measure has straight sided body and stands on a slightly flared and stepped foot with a double scroll handle. The inner base is clearly marked with the makers Touch mark, and to the left of the handle are the four hallmarks for Nathaniel Barber I which are often found on measures with Phillips touch mark.
Below the hallmarks is a clear crowned WR (William III Ale Standard mark). There is also a crowned X and pint label.
The verification marks are:
Crowned VR 396 for Hertford County.
LyStA over A for St Albans Liberty.
There is also a clear Hertfordshire County mark of a stag with antlers sitting down, this is stamped sideways.
Provenance:
Albert Bartram collection.
Condition:
Excellent condition with a lightly polished silver grey finish and some small traces of light oxide.
Repairs: There are no repairs that I could detect.
Size:
Height to rim: 4.25 in (11.00cm).
Capacity: 20.00floz.
Pewterer's reference number:
Pewter Society: - PS1343.
Cotterell: Old Pewter: Its Makers and Marks - OP3651.
Shipping costs:
UK: £15.00
Europe: £30.00
USA/Canada: £40.00
Other countries: Please ask.
Stock number: P-244.
A good one pint measure, by Thomas Phillips I of London, England who worked 1795 - 1849.
The measure has straight sided body and stands on a slightly flared and stepped foot with a double scroll handle. The inner base is clearly marked with the makers Touch mark, and to the left of the handle are the four hallmarks for Nathaniel Barber I which are often found on measures with Phillips touch mark.
Below the hallmarks is a clear crowned WR (William III Ale Standard mark). There is also a crowned X and pint label.
The verification marks are:
Crowned VR 396 for Hertford County.
LyStA over A for St Albans Liberty.
There is also a clear Hertfordshire County mark of a stag with antlers sitting down, this is stamped sideways.
Provenance:
Albert Bartram collection.
Condition:
Excellent condition with a lightly polished silver grey finish and some small traces of light oxide.
Repairs: There are no repairs that I could detect.
Size:
Height to rim: 4.25 in (11.00cm).
Capacity: 20.00floz.
Pewterer's reference number:
Pewter Society: - PS1343.
Cotterell: Old Pewter: Its Makers and Marks - OP3651.
Shipping costs:
UK: £15.00
Europe: £30.00
USA/Canada: £40.00
Other countries: Please ask.
Stock number: P-244.
£125
| $166 USD | €143 EUR
ANTIQUE ENGLISH PEWTER 1 PINT MEASURE BY ...
Item Ref
P-252
Description:
A good one pint measure, by M Fothergill & Sons of Bristol, England who worked 1793 - 1835.
The measure has straight sided body with low fillet and stands on a slightly flared and heavily stepped foot with a single curve handle. The inner base is marked with the makers mark along with a crowned X, and to the left of the handle are the four maker's hallmarks.
Below the hallmarks is a clear IMPERIAL label.
Ownership initials TCM are stamped in large clear letters.
The single verification mark is for Somerset County.
Provenance:
Albert Bartram collection.
Condition:
Excellent condition with a lightly polished silver grey finish and some traces of light oxide.
Repairs: There are no repairs that I could detect.
Size:
Height to rim: 5.00 in (13.00cm).
Capacity: 20.00floz.
Pewterer's reference number:
Pewter Society: - PS3468.
Cotterell: Old Pewter: Its Makers and Marks - OP1740.
Shipping costs:
UK: £15.00
Europe: £30.00
USA/Canada: £40.00
Other countries: Please ask.
Stock number: P-252.
A good one pint measure, by M Fothergill & Sons of Bristol, England who worked 1793 - 1835.
The measure has straight sided body with low fillet and stands on a slightly flared and heavily stepped foot with a single curve handle. The inner base is marked with the makers mark along with a crowned X, and to the left of the handle are the four maker's hallmarks.
Below the hallmarks is a clear IMPERIAL label.
Ownership initials TCM are stamped in large clear letters.
The single verification mark is for Somerset County.
Provenance:
Albert Bartram collection.
Condition:
Excellent condition with a lightly polished silver grey finish and some traces of light oxide.
Repairs: There are no repairs that I could detect.
Size:
Height to rim: 5.00 in (13.00cm).
Capacity: 20.00floz.
Pewterer's reference number:
Pewter Society: - PS3468.
Cotterell: Old Pewter: Its Makers and Marks - OP1740.
Shipping costs:
UK: £15.00
Europe: £30.00
USA/Canada: £40.00
Other countries: Please ask.
Stock number: P-252.
£125
| $166 USD | €143 EUR
ANTIQUE ENGLISH PEWTER DOME LID SHIPS INKWELL ...
Item Ref
P-286
Description:
Antique English pewter dome lid ships inkwell, the dome lid is fixed with a brass hinge allowing it to swing to expose the glass inkwell. The inkwell has a broad flared base and a pivoted system to keep it level as the ship moves.
The original glass liner is still in place and in perfect condition.
Condition:
The inkwell is in excellent condition with a polished finish all over with traces of oxide.
Repairs: There are no repairs that I could detect.
Size:
Height: 3.50in (9.00cm).
Base diameter: 6.00in (15.00cm).
There are no makers marks.
Shipping costs:
UK: £15.00
Europe: £30.00
USA/Canada: £40.00
Other countries: Please ask.
Stock number: P-286.
Antique English pewter dome lid ships inkwell, the dome lid is fixed with a brass hinge allowing it to swing to expose the glass inkwell. The inkwell has a broad flared base and a pivoted system to keep it level as the ship moves.
The original glass liner is still in place and in perfect condition.
Condition:
The inkwell is in excellent condition with a polished finish all over with traces of oxide.
Repairs: There are no repairs that I could detect.
Size:
Height: 3.50in (9.00cm).
Base diameter: 6.00in (15.00cm).
There are no makers marks.
Shipping costs:
UK: £15.00
Europe: £30.00
USA/Canada: £40.00
Other countries: Please ask.
Stock number: P-286.
£125
| $166 USD | €143 EUR
ANTIQUE ENGLISH PEWTER 9in PLAIN RIM DEEP ...
Item Ref
PP55
Description:
Antique English pewter plain rim deep plate by Yates, Birch & Spooner of Birmingham, England, who worked 1828-1839. The front rim is engraved with the initials 'CHL' and the date 1845. The reverse of the plate has a clear touch mark along with a crowned X and a London label, there is also a clear set of hall marks. This plate has a particularly well hammered bouge.
Condition:
The plate is in good condition with an unpolished finish to the front, there are some knife marks to the front showing signs of use. The reverse is unpolished with light oxide.
Repairs: There are no repairs.
Size: 9.25 inch diameter (23.50cm).
Weight: 465 grams.
Pewterer's reference number:
Pewter Society: - PS75.
Cotterell: Old Pewter: Its Makers and Marks - OP5349.
Shipping costs:
UK: £10.00
Europe: £20.00
USA/Canada: £30.00
Other countries: Please ask.
Stock number: PP55.
Antique English pewter plain rim deep plate by Yates, Birch & Spooner of Birmingham, England, who worked 1828-1839. The front rim is engraved with the initials 'CHL' and the date 1845. The reverse of the plate has a clear touch mark along with a crowned X and a London label, there is also a clear set of hall marks. This plate has a particularly well hammered bouge.
Condition:
The plate is in good condition with an unpolished finish to the front, there are some knife marks to the front showing signs of use. The reverse is unpolished with light oxide.
Repairs: There are no repairs.
Size: 9.25 inch diameter (23.50cm).
Weight: 465 grams.
Pewterer's reference number:
Pewter Society: - PS75.
Cotterell: Old Pewter: Its Makers and Marks - OP5349.
Shipping costs:
UK: £10.00
Europe: £20.00
USA/Canada: £30.00
Other countries: Please ask.
Stock number: PP55.
£100
| $133 USD | €115 EUR
ANTIQUE EUROPEAN PEWTER 9in WAVY EDGE PLATE, ...
Item Ref
P-142a
Description:
Antique European pewter wavy edge plate of 9.50 inch diameter. This is a well made plate with a heavy cast rim. There are no visible touch marks or other makers / ownership marks. There are many knife marks to the front showing signs of regular use.
Condition:
The plate is in excellent condition with a polished finish to the front, with very slight traces of oxide. The reverse is also lightly polished with some very light oxide.
Repairs: There are no repairs.
Size: 9.50 inch diameter (24.00cm).
Weight: 578 grams.
Provenance:
Ex Andrew Crawforth Collection.
Shipping costs:
UK: £10.00
Europe: £20.00
USA/Canada: £30.00
Other countries: Please ask.
Stock number: P-142a.
Antique European pewter wavy edge plate of 9.50 inch diameter. This is a well made plate with a heavy cast rim. There are no visible touch marks or other makers / ownership marks. There are many knife marks to the front showing signs of regular use.
Condition:
The plate is in excellent condition with a polished finish to the front, with very slight traces of oxide. The reverse is also lightly polished with some very light oxide.
Repairs: There are no repairs.
Size: 9.50 inch diameter (24.00cm).
Weight: 578 grams.
Provenance:
Ex Andrew Crawforth Collection.
Shipping costs:
UK: £10.00
Europe: £20.00
USA/Canada: £30.00
Other countries: Please ask.
Stock number: P-142a.
£100
| $133 USD | €115 EUR
ANTIQUE ENGLISH PEWTER 1 PINT MEASURE, BY ...
Item Ref
P-246
Description:
Antique English pewter 1 pint measure by Frederic Sanders of London who worked 1861 - 1876. The measure is straight sided with a low banded fillet to the drum. The makers mark is inside the base. The front of the measure is engraved 'P Fuller, Yew Tree, Felstead'. The Yew Tree Inn in Causeway End, Felstead and was closed in 2007, the property is now in residential use. P Fuller would have been the landlord around 1870. The thumb rest on top of the handle is engraved with the letter 'F'.
Verification marks:
There is a 'Pint' label to the left of the handle.
Crown VR 179 and 'EXS' to the right of the handle.
Condition:
The measure is in excellent condition with a very lightly polished silver-grey finish with traces of light oxide.
Repairs: There are no repairs.
Size:
Height 4.375in (11.20cm)
Base diameter 3.875in (9.80cm).
Capacity: 20.00fl.oz.
Pewterer's reference number:
Pewter Society: PS13120.
Cotterell: Old Pewter: Its Makers and Marks: -
Shipping costs:
UK: £12.00
Europe: £25.00
USA/Canada: £35.00
Stock number: P-246
Antique English pewter 1 pint measure by Frederic Sanders of London who worked 1861 - 1876. The measure is straight sided with a low banded fillet to the drum. The makers mark is inside the base. The front of the measure is engraved 'P Fuller, Yew Tree, Felstead'. The Yew Tree Inn in Causeway End, Felstead and was closed in 2007, the property is now in residential use. P Fuller would have been the landlord around 1870. The thumb rest on top of the handle is engraved with the letter 'F'.
Verification marks:
There is a 'Pint' label to the left of the handle.
Crown VR 179 and 'EXS' to the right of the handle.
Condition:
The measure is in excellent condition with a very lightly polished silver-grey finish with traces of light oxide.
Repairs: There are no repairs.
Size:
Height 4.375in (11.20cm)
Base diameter 3.875in (9.80cm).
Capacity: 20.00fl.oz.
Pewterer's reference number:
Pewter Society: PS13120.
Cotterell: Old Pewter: Its Makers and Marks: -
Shipping costs:
UK: £12.00
Europe: £25.00
USA/Canada: £35.00
Stock number: P-246
£100
| $133 USD | €115 EUR
ANTIQUE ENGLISH PEWTER POCKET SNUFF OR TOBACCO ...
Item Ref
P-003b
Description:
Antique English pewter gentleman's pocket snuff or tobacco box, no makers marks but would date from about 1840. The hinged lid has attractive decoration to the top, the base also has similar decoration.
Condition:
Excellent original condition, lightly polished, the original hinge is in perfect condition.
Repairs: There are no repairs that I could detect.
Size:
Length: 2.125 in (5.40cm).
depth: 1.375in (3.3cm).
Height: 0.5in (1.30cm).
Weight: 40 grams.
Pewterer's reference number:
Pewter Society: - .
Cotterell: Old Pewter: Its Makers and Marks - .
Shipping costs:
UK: £7.00
Europe: £17.00
USA/Canada: £30.00
Other countries: Please ask.
Stock number: P-003b.
Antique English pewter gentleman's pocket snuff or tobacco box, no makers marks but would date from about 1840. The hinged lid has attractive decoration to the top, the base also has similar decoration.
Condition:
Excellent original condition, lightly polished, the original hinge is in perfect condition.
Repairs: There are no repairs that I could detect.
Size:
Length: 2.125 in (5.40cm).
depth: 1.375in (3.3cm).
Height: 0.5in (1.30cm).
Weight: 40 grams.
Pewterer's reference number:
Pewter Society: - .
Cotterell: Old Pewter: Its Makers and Marks - .
Shipping costs:
UK: £7.00
Europe: £17.00
USA/Canada: £30.00
Other countries: Please ask.
Stock number: P-003b.
£60
| $80 USD | €69 EUR
ANTIQUE IRISH PEWTER CHURCH FLAGON BY JOHN ...
Item Ref
P-051
Description:
Irish Half-gallon capacity, of typical Dublin 'Beefeater' type, with a bold swan's neck handle, double-dome lid, reeded spout and reeded chairback thumbpiece, by John Heaney of Dublin who worked 1763 - 1807. Good makers hallmarks to the base.
These flagon were for communion use in Churches.
Literature: See D. Hall, Types of Irish Pewter, In association with the National Museum of Ireland (2005), pp. 23 - 24, for further illustrated examples.
Condition:
Excellent condition with a polished silver grey finish and some small traces of light oxide.
Repairs: There are no repairs that I could detect.
Size:
Height to top of thumbpiece: 11.50 in (29.50cm).
Base diameter: 7.25in (18.4cm).
Capacity: Approximately 1/2 gallon .
Pewterer's reference number:
Pewter Society: - PS4536.
Cotterell: Old Pewter: Its Makers and Marks - OP2242.
Shipping costs:
UK: £15.00
Europe: £30.00
USA/Canada: £50.00
Other countries: Please ask.
Irish Half-gallon capacity, of typical Dublin 'Beefeater' type, with a bold swan's neck handle, double-dome lid, reeded spout and reeded chairback thumbpiece, by John Heaney of Dublin who worked 1763 - 1807. Good makers hallmarks to the base.
These flagon were for communion use in Churches.
Literature: See D. Hall, Types of Irish Pewter, In association with the National Museum of Ireland (2005), pp. 23 - 24, for further illustrated examples.
Condition:
Excellent condition with a polished silver grey finish and some small traces of light oxide.
Repairs: There are no repairs that I could detect.
Size:
Height to top of thumbpiece: 11.50 in (29.50cm).
Base diameter: 7.25in (18.4cm).
Capacity: Approximately 1/2 gallon .
Pewterer's reference number:
Pewter Society: - PS4536.
Cotterell: Old Pewter: Its Makers and Marks - OP2242.
Shipping costs:
UK: £15.00
Europe: £30.00
USA/Canada: £50.00
Other countries: Please ask.
SOLD
ANTIQUE ENGLISH PEWTER CHURCH FLAGON BY JOHN ...
Item Ref
P-180
Description:
English pewter church flagon with tapering drum body, low fillet and a large flared foot, large scroll handle with heart shaped thumbpiece. Makers hallmarks to the top of the lid, clear touch mark dated 1662 to the inside of the base. Initials to back of thumbpiece.
Circa 1680.
These flagon were for communion use in Churches.
Condition:
Excellent condition with a lightly polished silver grey finish and some small traces of light oxide.
Repairs: it would appear that the top handle has been re-attached to the body and the lid re-attached to the hinge at some point in the flagons life.
Size:
Height to top of thumbpiece: 10.00 in (25.00cm).
Base diameter: 6.50in (16.5cm).
Pewterer's reference number:
Pewter Society: - PS85.
Cotterell: Old Pewter: Its Makers and Marks - OP5016.
Shipping costs:
UK: £15.00
Europe: £30.00
USA/Canada: £50.00
Other countries: Please ask.
English pewter church flagon with tapering drum body, low fillet and a large flared foot, large scroll handle with heart shaped thumbpiece. Makers hallmarks to the top of the lid, clear touch mark dated 1662 to the inside of the base. Initials to back of thumbpiece.
Circa 1680.
These flagon were for communion use in Churches.
Condition:
Excellent condition with a lightly polished silver grey finish and some small traces of light oxide.
Repairs: it would appear that the top handle has been re-attached to the body and the lid re-attached to the hinge at some point in the flagons life.
Size:
Height to top of thumbpiece: 10.00 in (25.00cm).
Base diameter: 6.50in (16.5cm).
Pewterer's reference number:
Pewter Society: - PS85.
Cotterell: Old Pewter: Its Makers and Marks - OP5016.
Shipping costs:
UK: £15.00
Europe: £30.00
USA/Canada: £50.00
Other countries: Please ask.
SOLD
ANTIQUE ENGLISH PEWTER SPIRE FLAGON BY JOHN ...
Item Ref
P-078
Description:
A large spire flagon by John Newham of London, England; who worked 1699 - 1733. The flagon is inscribed to the front with a star (sun) containing IHS and a cross; under this is inscribed Kilsby 1726. Kilsby is a village and civil parish in the Daventry district of Northamptonshire, England. It is situated a short distance south of the border with Warwickshire approximately five miles southeast of Rugby.
The flagon has a tapering cylindrical body on a large flared foot. There are bands of ovolo moulding just above the foot and also just below the upper handle terminal. The flagon has a double dome lid toped with a finial, it has an upright scroll thumbpiece. The handle is of a swan neck form.
There are a partial set of makers hall marks and a touch mark inside the base.
These flagon were for communion use in Churches.
Note: A smaller version of this flagon is held in the collection of The Worshipful Company of Pewterers, and published as item number 114 of their collection.
Condition:
Excellent condition with a polished silver grey finish and some small traces of light oxide.
Repairs: There are no repairs that I could detect.
Size:
Height to top of finial: 15.00 in (38.20cm).
Base diameter: 7.25in (18.4cm).
Capacity: To be confirmed.
Weight: 2627 grams.
Pewterer's reference number:
Pewter Society: - PS6728.
Cotterell: Old Pewter: Its Makers and Marks - OP3372.
Shipping costs:
UK: £15.00
Europe: £30.00
USA/Canada: £50.00
Other countries: Please ask.
Stock number: P-078.
A large spire flagon by John Newham of London, England; who worked 1699 - 1733. The flagon is inscribed to the front with a star (sun) containing IHS and a cross; under this is inscribed Kilsby 1726. Kilsby is a village and civil parish in the Daventry district of Northamptonshire, England. It is situated a short distance south of the border with Warwickshire approximately five miles southeast of Rugby.
The flagon has a tapering cylindrical body on a large flared foot. There are bands of ovolo moulding just above the foot and also just below the upper handle terminal. The flagon has a double dome lid toped with a finial, it has an upright scroll thumbpiece. The handle is of a swan neck form.
There are a partial set of makers hall marks and a touch mark inside the base.
These flagon were for communion use in Churches.
Note: A smaller version of this flagon is held in the collection of The Worshipful Company of Pewterers, and published as item number 114 of their collection.
Condition:
Excellent condition with a polished silver grey finish and some small traces of light oxide.
Repairs: There are no repairs that I could detect.
Size:
Height to top of finial: 15.00 in (38.20cm).
Base diameter: 7.25in (18.4cm).
Capacity: To be confirmed.
Weight: 2627 grams.
Pewterer's reference number:
Pewter Society: - PS6728.
Cotterell: Old Pewter: Its Makers and Marks - OP3372.
Shipping costs:
UK: £15.00
Europe: £30.00
USA/Canada: £50.00
Other countries: Please ask.
Stock number: P-078.
SOLD
CHARLES II PEWTER TRIPLE REEDED HAMMERED PLATE ...
Item Ref
P-124
Description:
Antique English pewter triple reeded plate of 8.625 inch diameter. The front rim bears a set of hall marks for Thomas Smith of London who worked 1675 - 1703, The rim also has punched ownership initials 'RDS', which may possibly be a marriage triad. The reverse bears two partial touch marks along with a host of collectors labels. Of particular note is that this plate is very well hammered all over to include the rim.
Condition:
The plate is in excellent condition with a very lightly polished finish to the front, with traces of oxide left within the hammer marks. The reverse is also lightly polished with some light oxide.
Repairs: There are no repairs.
Size: 8.625 inch diameter (21.90cm). The rim width is 1.00 inch (2.50cm).
Weight: 375 grams.
Pewterer's reference number:
Pewter Society: PS8673.
Cotterell: Old Pewter: Its Makers and Marks: OP4385.
Provenance:
Ex A. V. Sutherland-Graeme Collection (no.110). Sold Sotheby's 3rd June 1965, part lot 39.
Ex G. Hands Collection.
Ex M. Toothill Collection.
Ex J Douglas Collection (no P3).
Shipping costs:
UK: £10.00
Europe: £20.00
USA/Canada: £30.00
Other countries: Please ask.
Stock number: P-124.
Antique English pewter triple reeded plate of 8.625 inch diameter. The front rim bears a set of hall marks for Thomas Smith of London who worked 1675 - 1703, The rim also has punched ownership initials 'RDS', which may possibly be a marriage triad. The reverse bears two partial touch marks along with a host of collectors labels. Of particular note is that this plate is very well hammered all over to include the rim.
Condition:
The plate is in excellent condition with a very lightly polished finish to the front, with traces of oxide left within the hammer marks. The reverse is also lightly polished with some light oxide.
Repairs: There are no repairs.
Size: 8.625 inch diameter (21.90cm). The rim width is 1.00 inch (2.50cm).
Weight: 375 grams.
Pewterer's reference number:
Pewter Society: PS8673.
Cotterell: Old Pewter: Its Makers and Marks: OP4385.
Provenance:
Ex A. V. Sutherland-Graeme Collection (no.110). Sold Sotheby's 3rd June 1965, part lot 39.
Ex G. Hands Collection.
Ex M. Toothill Collection.
Ex J Douglas Collection (no P3).
Shipping costs:
UK: £10.00
Europe: £20.00
USA/Canada: £30.00
Other countries: Please ask.
Stock number: P-124.
SOLD
A LARGE CHARLES II PEWTER 22in BROAD ...
Item Ref
P-113
Description:
Antique English pewter broad rim charger of large size dating from the period 1660-1680. There are no makers hallmarks or touchmarks that can be seen.
Provenance:
By repute Haddon Hall, Derbyshire. (Bonham's).
Condition:
The charger is in good condition with a very lightly cleaned finish to the front, there are some knife marks to the front showing signs of use. The reverse is partially cleaned with some oxide.
Repairs: There several old repairs that can be seen in the images.
Size: 22.00 inch diameter (55.80cm).
Rim - 4.125in (10.50cm). 38%.
Weight: TBA grams.
Pewterer's reference number:
Pewter Society: - Not known.
Cotterell: Old Pewter: Its Makers and Marks - Not known.
Shipping costs:
UK: £20.00
Europe: £60.00
USA/Canada: £100.00
Other countries: Please ask.
Stock number: P-113.
Antique English pewter broad rim charger of large size dating from the period 1660-1680. There are no makers hallmarks or touchmarks that can be seen.
Provenance:
By repute Haddon Hall, Derbyshire. (Bonham's).
Condition:
The charger is in good condition with a very lightly cleaned finish to the front, there are some knife marks to the front showing signs of use. The reverse is partially cleaned with some oxide.
Repairs: There several old repairs that can be seen in the images.
Size: 22.00 inch diameter (55.80cm).
Rim - 4.125in (10.50cm). 38%.
Weight: TBA grams.
Pewterer's reference number:
Pewter Society: - Not known.
Cotterell: Old Pewter: Its Makers and Marks - Not known.
Shipping costs:
UK: £20.00
Europe: £60.00
USA/Canada: £100.00
Other countries: Please ask.
Stock number: P-113.
SOLD
ANTIQUE ENGLISH PEWTER 23 3/4in MULTIPLE REEDED ...
Item Ref
P-147
Antique English pewter triple reeded charger of 23.75 inch diameter, by Henry Wiggin of London, England, who worked 1679-1694. The front rim bears a full set of clear hall marks along with a Marriage triad of 'S OVER WM' . The reverse rim has a partial touchmark and a 'rose and crown' mark.
This is a large and very well made charger with a cast reeded rim.
Condition:
The charger is in excellent condition with a lightly polished finish to the front, there are some knife marks to the front showing signs of use. The reverse is unpolished but has been cleaned leaving a few traces of oxide.
Repairs: There are no repairs that could be detected.
Size: 23.75 inch diameter (60.20cm).
Weight: TBA.
Pewterer's reference number:
Pewter Society: - PS10121.
Cotterell: Old Pewter: Its Makers and Marks - OP5136.
This charger is illustrated on the Pewter Society database as ware number 5369.
Shipping costs:
UK: £15.00
Europe: £40.00
USA/Canada: £80.00
Other countries: Please ask.
Stock number: P-147.
This is a large and very well made charger with a cast reeded rim.
Condition:
The charger is in excellent condition with a lightly polished finish to the front, there are some knife marks to the front showing signs of use. The reverse is unpolished but has been cleaned leaving a few traces of oxide.
Repairs: There are no repairs that could be detected.
Size: 23.75 inch diameter (60.20cm).
Weight: TBA.
Pewterer's reference number:
Pewter Society: - PS10121.
Cotterell: Old Pewter: Its Makers and Marks - OP5136.
This charger is illustrated on the Pewter Society database as ware number 5369.
Shipping costs:
UK: £15.00
Europe: £40.00
USA/Canada: £80.00
Other countries: Please ask.
Stock number: P-147.
SOLD
ANTIQUE ENGLISH PEWTER 20 1/4 INCH BROAD ...
Item Ref
P-049
Description:
Antique English pewter broad rim charger of 20 1/4 inch diameter, by Robert Gregge of London who worked 1673 - 1684. The rim has two incised lines and bears rubbed hall marks and ownership initials 'TB'. There are two partial touch marks to the reverse rim.
Provenance:
Hanson's, Etwall Derbyshire, 28 Nov 2016 (Dare Wilson sale).
Condition:
The charger is in good condition with a very lightly cleaned finish to the front, there are some knife marks to the front showing signs of use. The reverse is un-cleaned with some oxide.
Repairs: TBA.
Size: 20.25 inch diameter (51.40cm).
Rim width: 3.50in (8.90cm). 34.63%.
Weight: TBA grams.
Pewterer's reference number:
Pewter Society: PS4028.
Cotterell: Old Pewter: Its Makers and Marks - OP1999.
This Charger is listed on the Pewter Society database as ware number 4350.
Shipping costs:
UK: £15.00
Europe: £40.00
USA/Canada: £80.00
Other countries: Please ask.
Stock number: P-049.
Antique English pewter broad rim charger of 20 1/4 inch diameter, by Robert Gregge of London who worked 1673 - 1684. The rim has two incised lines and bears rubbed hall marks and ownership initials 'TB'. There are two partial touch marks to the reverse rim.
Provenance:
Hanson's, Etwall Derbyshire, 28 Nov 2016 (Dare Wilson sale).
Condition:
The charger is in good condition with a very lightly cleaned finish to the front, there are some knife marks to the front showing signs of use. The reverse is un-cleaned with some oxide.
Repairs: TBA.
Size: 20.25 inch diameter (51.40cm).
Rim width: 3.50in (8.90cm). 34.63%.
Weight: TBA grams.
Pewterer's reference number:
Pewter Society: PS4028.
Cotterell: Old Pewter: Its Makers and Marks - OP1999.
This Charger is listed on the Pewter Society database as ware number 4350.
Shipping costs:
UK: £15.00
Europe: £40.00
USA/Canada: £80.00
Other countries: Please ask.
Stock number: P-049.
SOLD
ANTIQUE ENGLISH PEWTER CHARLES II CHURCH FLAGON, ...
Item Ref
P-318
English pewter church flagon with a gently tapering drum with reeded-fillet below the collar, low fillet and a large flared foot, large scroll handle with shield shaped lower terminal and twin-lobed thumbpiece.
These flagon were for communion use in Churches.
Circa 1670.
There are no makers marks that I can find.
Condition:
Excellent condition with a lightly polished silver grey finish and some traces of light oxide.
Repairs: There are no repairs that I can detect.
Size:
Height to top of thumbpiece: 12.50 in (32.00cm).
Base diameter: 7.25in (18.3cm).
Stock number: P-318.
Shipping costs:
UK: £15.00
Europe: £30.00
USA/Canada: £50.00
Other countries: Please ask.
These flagon were for communion use in Churches.
Circa 1670.
There are no makers marks that I can find.
Condition:
Excellent condition with a lightly polished silver grey finish and some traces of light oxide.
Repairs: There are no repairs that I can detect.
Size:
Height to top of thumbpiece: 12.50 in (32.00cm).
Base diameter: 7.25in (18.3cm).
Stock number: P-318.
Shipping costs:
UK: £15.00
Europe: £30.00
USA/Canada: £50.00
Other countries: Please ask.
SOLD
ANTIQUE DUTCH PEWTER WILLIAM & MARY PORTRAIT ...
Item Ref
P-114
Antique Dutch pewter beaker with wriggle work decoration and portraits of William III and Mary II of England. The beaker is of large size.
Circa 1689.
The condition is good with a polished finish. There are some historic small dents to the rim.
There is a good clear makers mark to the base with the makers initials 'IBN'.
Size:
Height: 6.75in (17cm)
Shipping costs:
UK: £15.00
Europe: £25.00
USA/Canada: £35.00
Other countries: Please ask.
Stock number: P-114.
Circa 1689.
The condition is good with a polished finish. There are some historic small dents to the rim.
There is a good clear makers mark to the base with the makers initials 'IBN'.
Size:
Height: 6.75in (17cm)
Shipping costs:
UK: £15.00
Europe: £25.00
USA/Canada: £35.00
Other countries: Please ask.
Stock number: P-114.
SOLD
CHARLES II PEWTER 18.25in BROAD RIM CHARGER, ...
Item Ref
P-222
Description:
Antique English pewter broad rim charger of 18.25in diameter, by Thomas Dickinson of St. Sepulchre, London; who worked 1665 - 1671.
The charger has a full set of hallmarks to the front rim along with the marriage triad 'B over IS'. There is a touchmark to the reverse rim.
Provenance:
A Bartram collection.
Auction:
Bonhams Chester 7th May 2008, lot 409.
Condition:
The charger is in good condition with a lightly cleaned finish to the front, there are some knife marks to the front showing signs of use. The reverse is un-cleaned.
Repairs: There is possibly an old repair to the rim that can be seen in the images.
Size: 18.25 inch diameter (46.40cm).
Rim - 3.75in (9.00cm). 39%.
Weight: TBA grams.
Pewterer's reference number:
Pewter Society: - PS2855.
Cotterell: Old Pewter: Its Makers and Marks - OP1380 / OP5555.
This charger is listed as ware number 1987 on the Pewter Society database.
Shipping costs:
Free world wide shipping with DHL is included in the price.
Stock number: P-222.
Antique English pewter broad rim charger of 18.25in diameter, by Thomas Dickinson of St. Sepulchre, London; who worked 1665 - 1671.
The charger has a full set of hallmarks to the front rim along with the marriage triad 'B over IS'. There is a touchmark to the reverse rim.
Provenance:
A Bartram collection.
Auction:
Bonhams Chester 7th May 2008, lot 409.
Condition:
The charger is in good condition with a lightly cleaned finish to the front, there are some knife marks to the front showing signs of use. The reverse is un-cleaned.
Repairs: There is possibly an old repair to the rim that can be seen in the images.
Size: 18.25 inch diameter (46.40cm).
Rim - 3.75in (9.00cm). 39%.
Weight: TBA grams.
Pewterer's reference number:
Pewter Society: - PS2855.
Cotterell: Old Pewter: Its Makers and Marks - OP1380 / OP5555.
This charger is listed as ware number 1987 on the Pewter Society database.
Shipping costs:
Free world wide shipping with DHL is included in the price.
Stock number: P-222.
SOLD
ANTIQUE ENGLISH PEWTER 1 QUART OEWS TANKARD ...
Item Ref
P-104
Description:
A good one quart tankard, Old English Wine Standard capacity; bearing the mark 'TB' believed to be Thomas Bankes of Wigan, England who worked 1706-1724.
The straight sided body has a low single fillet and stands on a slightly flared foot. The double dome lid has a ram's horn thumbpiece, the curve handle has cut-card decoration to the top and a boot-heel terminal. The inner base is clearly marked with the makers mark for 'TB'.
Provenance:
Sold Bonham's 22.01.2015 as lot 158.
Bonham's state that the old paper label and marked No.6 may refer to Christopher Peal.
The are other numerous collector's labels attached to the base.
Published examples:
'Pewter at Colonial Williamsburg' P198, item 248.
Condition:
Excellent condition with a lightly polished silver grey finish and some small traces of light oxide.
Repairs: There are no repairs that I could detect.
Size:
Height to top of thumb piece: 7.125 in (18.00cm).
Base diameter: 5.00in (12.7cm).
Capacity: 34.00floz, 1 quart Old English Wine Standard.
Weight: 951 grams.
Pewterer's reference number:
Pewter Society: - PS9601 Thomas Bankes or PS1373 TB.
Cotterell: Old Pewter: Its Makers and Marks - OP5472 TB.
Shipping costs:
UK: £10.00
Europe: £20.00
USA/Canada: £30.00
Other countries: Please ask.
Stock number: P-104.
A good one quart tankard, Old English Wine Standard capacity; bearing the mark 'TB' believed to be Thomas Bankes of Wigan, England who worked 1706-1724.
The straight sided body has a low single fillet and stands on a slightly flared foot. The double dome lid has a ram's horn thumbpiece, the curve handle has cut-card decoration to the top and a boot-heel terminal. The inner base is clearly marked with the makers mark for 'TB'.
Provenance:
Sold Bonham's 22.01.2015 as lot 158.
Bonham's state that the old paper label and marked No.6 may refer to Christopher Peal.
The are other numerous collector's labels attached to the base.
Published examples:
'Pewter at Colonial Williamsburg' P198, item 248.
Condition:
Excellent condition with a lightly polished silver grey finish and some small traces of light oxide.
Repairs: There are no repairs that I could detect.
Size:
Height to top of thumb piece: 7.125 in (18.00cm).
Base diameter: 5.00in (12.7cm).
Capacity: 34.00floz, 1 quart Old English Wine Standard.
Weight: 951 grams.
Pewterer's reference number:
Pewter Society: - PS9601 Thomas Bankes or PS1373 TB.
Cotterell: Old Pewter: Its Makers and Marks - OP5472 TB.
Shipping costs:
UK: £10.00
Europe: £20.00
USA/Canada: £30.00
Other countries: Please ask.
Stock number: P-104.
SOLD
ANTIQUE SCOTTISH PEWTER CRESTED TAPPIT HEN, CHOPIN ...
Item Ref
P-105
Description:
A good Scottish pewter crested tappit hen of 'chopin' capacity, this example would have been made in Glasgow although it is unmarked.
The tappit hen is of typical shouldered form with multiple incised bands to the shouldered body which stands on a foot rim, the is a cone and ball knop to the lid (this is less common than the normal acorn knop), the erect thumb piece is cast with three horizontal bars. There is a plouk inside the top, capacity to this point is 30floz. There are very good linen marks where the handle joins the body. The lid hinge is in five parts, typical of Glasgow tappit hens.
Provenance: Published and exhibited at The Currier Gallery of Art, Manchester, New Hampshire; 'British Pewter 1600-1850' April 1st - 28th 1974, item number 71.
Sold at Bonham's 22.01.2015 as lot 204.
Published examples:
'Scottish Pewter 1600-1850' by Peter Spencer Davies, page 198.
'The Neish Pewter Collection' page 119, item 179.
Condition:
Excellent condition with a lightly polished silver grey finish and some small traces of light oxide.
Repairs: There are no repairs that I could detect.
Size:
Height to top of knop: 9.75 in (24.50cm).
Base diameter: 4.00in (10.00cm).
Capacity: 30.00floz, Scottish Chopin.
Weight: 1175 grams.
Pewterer's reference number:
Pewter Society: - .
Cotterell: Old Pewter: Its Makers and Marks - .
Shipping costs:
UK: £10.00
Europe: £20.00
USA/Canada: £30.00
Other countries: Please ask.
Stock number: P-105.
A good Scottish pewter crested tappit hen of 'chopin' capacity, this example would have been made in Glasgow although it is unmarked.
The tappit hen is of typical shouldered form with multiple incised bands to the shouldered body which stands on a foot rim, the is a cone and ball knop to the lid (this is less common than the normal acorn knop), the erect thumb piece is cast with three horizontal bars. There is a plouk inside the top, capacity to this point is 30floz. There are very good linen marks where the handle joins the body. The lid hinge is in five parts, typical of Glasgow tappit hens.
Provenance: Published and exhibited at The Currier Gallery of Art, Manchester, New Hampshire; 'British Pewter 1600-1850' April 1st - 28th 1974, item number 71.
Sold at Bonham's 22.01.2015 as lot 204.
Published examples:
'Scottish Pewter 1600-1850' by Peter Spencer Davies, page 198.
'The Neish Pewter Collection' page 119, item 179.
Condition:
Excellent condition with a lightly polished silver grey finish and some small traces of light oxide.
Repairs: There are no repairs that I could detect.
Size:
Height to top of knop: 9.75 in (24.50cm).
Base diameter: 4.00in (10.00cm).
Capacity: 30.00floz, Scottish Chopin.
Weight: 1175 grams.
Pewterer's reference number:
Pewter Society: - .
Cotterell: Old Pewter: Its Makers and Marks - .
Shipping costs:
UK: £10.00
Europe: £20.00
USA/Canada: £30.00
Other countries: Please ask.
Stock number: P-105.
SOLD
ANTIQUE ENGLISH PEWTER TANKARD BY RICHARD GOING ...
Item Ref
P-053
Description:
A large and scarce tankard by Richard Going of Bristol, England; who worked 1715 - 1764. The tankard is of unusually large size having a capacity of 46floz, this would be over two and a half pints to the Old English Wine Standard.
The tankard is straight sided with a low fillet to the body which stands on a slightly flared foot. The double dome lid has a scroll thumbpiece, the heavy curved handle has a large fishtail terminal. The inside base bears the mark of Richard Going.
Richard Going was a prominent Bristol maker and exported on a regular basis to America. His shop was in Broad Quay, Bristol and is shown in the lower right hand corner of the painting by Peter Monamy; which is displayed in the Bristol City Museum. (see image attached).
Published examples:
'Pewter at Colonial Williamsburg' P21, items 265-267.
Condition:
Excellent condition with a lightly polished silver grey finish and some small traces of light oxide.
Repairs: There are no repairs that I could detect.
Size:
Height to top of thumb piece: 7.50 in (19.00cm).
Base diameter: 5.25in (13.3cm).
Capacity: 46.00floz, 2.5 Pints Old English Wine Standard.
Weight: 1224 grams.
Pewterer's reference number:
Pewter Society: - PS32.
Cotterell: Old Pewter: Its Makers and Marks - OP1909.
Shipping costs:
UK: £10.00
Europe: £20.00
USA/Canada: £30.00
Other countries: Please ask.
Stock number: P-053.
A large and scarce tankard by Richard Going of Bristol, England; who worked 1715 - 1764. The tankard is of unusually large size having a capacity of 46floz, this would be over two and a half pints to the Old English Wine Standard.
The tankard is straight sided with a low fillet to the body which stands on a slightly flared foot. The double dome lid has a scroll thumbpiece, the heavy curved handle has a large fishtail terminal. The inside base bears the mark of Richard Going.
Richard Going was a prominent Bristol maker and exported on a regular basis to America. His shop was in Broad Quay, Bristol and is shown in the lower right hand corner of the painting by Peter Monamy; which is displayed in the Bristol City Museum. (see image attached).
Published examples:
'Pewter at Colonial Williamsburg' P21, items 265-267.
Condition:
Excellent condition with a lightly polished silver grey finish and some small traces of light oxide.
Repairs: There are no repairs that I could detect.
Size:
Height to top of thumb piece: 7.50 in (19.00cm).
Base diameter: 5.25in (13.3cm).
Capacity: 46.00floz, 2.5 Pints Old English Wine Standard.
Weight: 1224 grams.
Pewterer's reference number:
Pewter Society: - PS32.
Cotterell: Old Pewter: Its Makers and Marks - OP1909.
Shipping costs:
UK: £10.00
Europe: £20.00
USA/Canada: £30.00
Other countries: Please ask.
Stock number: P-053.
SOLD
ANTIQUE NUREMBERG BRASS ALMS DISH 16 INCH ...
Item Ref
A026
A 16th century brass Nuremberg Alms Dish, the center with 'swirling' decoration surrounded by a band of Gothic script.
The rim bearing punched decoration.
The Alms dish is in excellent condition with a highly polished finish.
Lit. See ‘Messing’ page 51 by Hermann Lockner where an identical example is illustrated.
Koper and Bronz, Onno T Kuile Page 173.
Circa 1580.
Size:
Diameter: 16.00in (41.00cm).
Shipping costs:
UK: £15.00
Europe: £25.00
USA/Canada: £40.00
Other countries: Please ask.
The rim bearing punched decoration.
The Alms dish is in excellent condition with a highly polished finish.
Lit. See ‘Messing’ page 51 by Hermann Lockner where an identical example is illustrated.
Koper and Bronz, Onno T Kuile Page 173.
Circa 1580.
Size:
Diameter: 16.00in (41.00cm).
Shipping costs:
UK: £15.00
Europe: £25.00
USA/Canada: £40.00
Other countries: Please ask.
SOLD
ANTIQUE DUTCH PEWTER BEAKER WITH WRIGGLE WORK ...
Item Ref
P-022
Antique Dutch pewter beaker with floral wriggle work decoration.
Circa 1700.
The condition is good with a lightly polished finish. There is a very small old repair just above the base, this can be seen in the images.
There are good clear makers marks to the base along with ownership initials.
Province: Ex Gadd Collection, label to the base.
Size:
Height: 5.5in (14cm)
Shipping costs:
UK: £10.00
Europe: £18.00
USA/Canada: £25.00
Other countries: Please ask.
Stock number: P-022.
Circa 1700.
The condition is good with a lightly polished finish. There is a very small old repair just above the base, this can be seen in the images.
There are good clear makers marks to the base along with ownership initials.
Province: Ex Gadd Collection, label to the base.
Size:
Height: 5.5in (14cm)
Shipping costs:
UK: £10.00
Europe: £18.00
USA/Canada: £25.00
Other countries: Please ask.
Stock number: P-022.
SOLD
ANTIQUE ENGLISH PEWTER LIDDED TANKARD, C1740, BY ...
Item Ref
K013
A fine antique English pewter lidded tankard of 32 fluid ounce capacity, by Allen Bright of Bristol, Cott O.P 574.
The Tankard is of ‘tulip’ form, with double dome lid and an open heart thumb piece. Impressive handle with a ‘hooded’ ball terminal.
The inside base is struck with a very clear maker’s touch mark.
The tankard is in excellent condition with a polished silver grey finish.
Circa 1740.
Size:
Height: 7.5 in (19.0cm).
Shipping costs:
UK: £15.00
Europe: £25.00
USA/Canada: £40.00
Other countries: Please ask.
The Tankard is of ‘tulip’ form, with double dome lid and an open heart thumb piece. Impressive handle with a ‘hooded’ ball terminal.
The inside base is struck with a very clear maker’s touch mark.
The tankard is in excellent condition with a polished silver grey finish.
Circa 1740.
Size:
Height: 7.5 in (19.0cm).
Shipping costs:
UK: £15.00
Europe: £25.00
USA/Canada: £40.00
Other countries: Please ask.
SOLD
ANTIQUE ENGLISH PEWTER 17 3/8in MULTIPLE REEDED ...
Item Ref
P-004
Description:
Antique English pewter dish with a multiple reeded cast rim, of 17.375 inch diameter, by John Whitaker of London, England, who worked from 1676. There is a marriage triad 'P over IS' to the front rim along with a clear set of hall marks. The reverse rim has two partial touch marks.
This is a very well made dish with a very good cast rim.
Condition:
The dish is in excellent condition with a lightly polished finish to the front, there are some knife marks to the front showing signs of use. The reverse is unpolished with some oxide.
Repairs: There are no repairs that could be detected.
Size: 17.375 inch diameter (44.00cm).
Weight:
Pewterer's reference number:
Pewter Society: - PS10025.
Cotterell: Old Pewter: Its Makers and Marks - OP5086a.
This dish is illustrated on the Pewter Society database as ware number 4665.
Shipping costs:
UK: £15.00
Europe: £35.00
USA/Canada: £70.00
Other countries: Please ask.
Stock number: P-004.
Antique English pewter dish with a multiple reeded cast rim, of 17.375 inch diameter, by John Whitaker of London, England, who worked from 1676. There is a marriage triad 'P over IS' to the front rim along with a clear set of hall marks. The reverse rim has two partial touch marks.
This is a very well made dish with a very good cast rim.
Condition:
The dish is in excellent condition with a lightly polished finish to the front, there are some knife marks to the front showing signs of use. The reverse is unpolished with some oxide.
Repairs: There are no repairs that could be detected.
Size: 17.375 inch diameter (44.00cm).
Weight:
Pewterer's reference number:
Pewter Society: - PS10025.
Cotterell: Old Pewter: Its Makers and Marks - OP5086a.
This dish is illustrated on the Pewter Society database as ware number 4665.
Shipping costs:
UK: £15.00
Europe: £35.00
USA/Canada: £70.00
Other countries: Please ask.
Stock number: P-004.
SOLD
ANTIQUE ENGLISH PEWTER HALF GALLON SPOUTED ALE ...
Item Ref
PV45
Antique English pewter half gallon ale jug with double dome lid, shield thumb piece and original grille to the inside of the spout.
Circa 1850.
The condition is outstanding with no damage and a smooth grey finish. The jug has not been polished.
There are no makers marks.
There is an old Pewter Society label to the base.
Size:
Height: 8.75in (22.5cm)
Shipping costs:
UK: £10.00
Europe: £18.00
USA/Canada: £30.00
Other countries: Please ask.
Stock number: PV45.
Circa 1850.
The condition is outstanding with no damage and a smooth grey finish. The jug has not been polished.
There are no makers marks.
There is an old Pewter Society label to the base.
Size:
Height: 8.75in (22.5cm)
Shipping costs:
UK: £10.00
Europe: £18.00
USA/Canada: £30.00
Other countries: Please ask.
Stock number: PV45.
SOLD
ANTIQUE DUTCH PEWTER ANGEL FLAGON, MAASTRICHT, CIRCA ...
Item Ref
P-091
Description:
A Dutch pewter Angel flagon, known as 'Engelenkan' in Holland, probably from the town of Maastricht, circa 1720. The flagon has a large bulbous body with a flat lid with a solid erect thumbpiece cast with a relief of an angel's head; hence the name angel flagon. There is a partial touch mark to the base.
Note: A similar example is published in Van tin gegoten, uittin genoten, page 218, item number 173.
Condition:
Excellent condition with a polished silver grey finish and some very small traces of light oxide.
Repairs: There are no repairs that I could detect.
Size:
Height to top of finial: 11.00 in (28.50cm).
Base diameter: 5.00in (12.8cm).
Capacity: To be confirmed.
Weight: 1988 grams.
Maker: Unknown.
Shipping costs:
UK: £15.00
Europe: £30.00
USA/Canada: £50.00
Other countries: Please ask.
Stock number: P-091.
A Dutch pewter Angel flagon, known as 'Engelenkan' in Holland, probably from the town of Maastricht, circa 1720. The flagon has a large bulbous body with a flat lid with a solid erect thumbpiece cast with a relief of an angel's head; hence the name angel flagon. There is a partial touch mark to the base.
Note: A similar example is published in Van tin gegoten, uittin genoten, page 218, item number 173.
Condition:
Excellent condition with a polished silver grey finish and some very small traces of light oxide.
Repairs: There are no repairs that I could detect.
Size:
Height to top of finial: 11.00 in (28.50cm).
Base diameter: 5.00in (12.8cm).
Capacity: To be confirmed.
Weight: 1988 grams.
Maker: Unknown.
Shipping costs:
UK: £15.00
Europe: £30.00
USA/Canada: £50.00
Other countries: Please ask.
Stock number: P-091.
SOLD
ANTIQUE ENGLISH PEWTER 1 PINT LIDDED TANKARD, ...
Item Ref
A005
A fine antique English pewter lidded tankard of 1 Imperial pint capacity, by Allen Bright of Bristol, Cott O.P 574.
The Tankard is of ‘tulip’ form, with double dome lid and a solid chair back thumb piece. Impressive handle with a ‘hooded’ ball terminal.
The base is struck with the maker’s touch mark.
The tankard is in excellent condition with a polished silver grey finish.
Circa 1740.
Size:
Height: 6.0 in (15.3cm).
Shipping costs:
UK: £10.00
Europe: £20.00
USA/Canada: £30.00
Other countries: Please ask.
The Tankard is of ‘tulip’ form, with double dome lid and a solid chair back thumb piece. Impressive handle with a ‘hooded’ ball terminal.
The base is struck with the maker’s touch mark.
The tankard is in excellent condition with a polished silver grey finish.
Circa 1740.
Size:
Height: 6.0 in (15.3cm).
Shipping costs:
UK: £10.00
Europe: £20.00
USA/Canada: £30.00
Other countries: Please ask.
SOLD
GEORGE II PEWTER PLATE WITH GADROONED EDGE ...
Item Ref
P-121
Description:
Antique English pewter plate of 9.75 inch diameter with gadrooned edge. The front rim bears the coat of arms and crest for Morice of Werrington, Devon. (see details below). The rear of the plate bears the touch mark of John Carpenter of London, who worked 1711 - 1747.
Condition:
The plate is in excellent condition with a very lightly polished finish to the front, with some very slight traces of oxide. The reverse is also lightly polished with some light oxide.
Repairs: There are no repairs.
Size: 9.75 inch diameter (24.70cm). The rim width is 1.375 inch (3.40cm).
Weight: 600 grams.
Pewterer's reference number:
Pewter Society: PS25.
Cotterell: Old Pewter: Its Makers and Marks: OP810.
Provenance:
Ex J Douglas Collection (no P32).
Purchased from Robin Bellamy, Peter Hornsby, Grosvenor House Antiques Fair, London 1985.
Notes on 'Morice'.
The coat of arms engraved to the front of this plate is 'gules, a lion rampant regardant' with a crest above of 'a falcon standing on a perch'. This coat of arms is for Morice of Werrington, Devon. The 3rd Baronet, Sir William Morice (1707 - 1750) succeeded his Father the 2nd Baronet in 1726. Sir William died in 1750 without issue and the Baronetcy became extinct.
Based on the touch mark for John Carpenter (1711 - 1747) and the style of the plate it is likely that this plate was made for Sir William Morice, 3rd Baronet by John Carpenter.
Shipping costs:
UK: £10.00
Europe: £20.00
USA/Canada: £30.00
Other countries: Please ask.
Stock number: P-121.
Antique English pewter plate of 9.75 inch diameter with gadrooned edge. The front rim bears the coat of arms and crest for Morice of Werrington, Devon. (see details below). The rear of the plate bears the touch mark of John Carpenter of London, who worked 1711 - 1747.
Condition:
The plate is in excellent condition with a very lightly polished finish to the front, with some very slight traces of oxide. The reverse is also lightly polished with some light oxide.
Repairs: There are no repairs.
Size: 9.75 inch diameter (24.70cm). The rim width is 1.375 inch (3.40cm).
Weight: 600 grams.
Pewterer's reference number:
Pewter Society: PS25.
Cotterell: Old Pewter: Its Makers and Marks: OP810.
Provenance:
Ex J Douglas Collection (no P32).
Purchased from Robin Bellamy, Peter Hornsby, Grosvenor House Antiques Fair, London 1985.
Notes on 'Morice'.
The coat of arms engraved to the front of this plate is 'gules, a lion rampant regardant' with a crest above of 'a falcon standing on a perch'. This coat of arms is for Morice of Werrington, Devon. The 3rd Baronet, Sir William Morice (1707 - 1750) succeeded his Father the 2nd Baronet in 1726. Sir William died in 1750 without issue and the Baronetcy became extinct.
Based on the touch mark for John Carpenter (1711 - 1747) and the style of the plate it is likely that this plate was made for Sir William Morice, 3rd Baronet by John Carpenter.
Shipping costs:
UK: £10.00
Europe: £20.00
USA/Canada: £30.00
Other countries: Please ask.
Stock number: P-121.
SOLD
ANTIQUE ENGLISH PEWTER 1 QUART SPOUTED MEASURE ...
Item Ref
P459
Antique English pewter 1 quart spouted measure with double dome lid; by Samuel Cocks of London, who is recorded as working in 1819.
The measure is of ‘U’ shaped form with a single banded fillet to the body. The double dome lid has an open chair back thumb piece; the handle is double scroll with fishtail terminal. The measure stands on a large flared foot.
The hall marks of Samuel Cocks are found to the left of the handle. There are no verification marks.
The condition is excellent with a polished silver grey finish; there are some traces of oxide.
Circa 1819.
Size:
Height: 8.25in (21.0cm)
Top diameter: 4.0in (10.2cm).
Base diameter: 4.5in (11.4cm)
Shipping costs:
UK: £10.00
Europe: £18.00
USA/Canada: £25.00
Other countries: Please ask.
The measure is of ‘U’ shaped form with a single banded fillet to the body. The double dome lid has an open chair back thumb piece; the handle is double scroll with fishtail terminal. The measure stands on a large flared foot.
The hall marks of Samuel Cocks are found to the left of the handle. There are no verification marks.
The condition is excellent with a polished silver grey finish; there are some traces of oxide.
Circa 1819.
Size:
Height: 8.25in (21.0cm)
Top diameter: 4.0in (10.2cm).
Base diameter: 4.5in (11.4cm)
Shipping costs:
UK: £10.00
Europe: £18.00
USA/Canada: £25.00
Other countries: Please ask.
SOLD
ANTIQUE ENGLISH PEWTER LIDDED TANKARD, OLD ENGLISH ...
Item Ref
PEW-022
Antique English pewter lidded tankard, 1 quart Old English Wine Standard.
Circa 1780.
A fine tankard with double dome lid, bulbous drum with fillet on a large flared foot.
Double scroll handle with fishtail terminal.
Open chair back thumb piece.
The hinge to the lid looks to be original with no repair.
There are rubbed makers marks to the left of the handle.
I have measured the capacity and it is about 33 fl oz; so 1 quart to the Old English Wine Standard.
The tankard has a polished silver grey finish, there is possibly a repair to the handle terminal (see detailed images).
Weight: 890g
Height to top of dome lid: 19cm (7.5in).
Shipping
I ship worldwide using UPS or equivalent fully tracked service.
UK: £8.00, Europe £15.00, USA: £35.00
Circa 1780.
A fine tankard with double dome lid, bulbous drum with fillet on a large flared foot.
Double scroll handle with fishtail terminal.
Open chair back thumb piece.
The hinge to the lid looks to be original with no repair.
There are rubbed makers marks to the left of the handle.
I have measured the capacity and it is about 33 fl oz; so 1 quart to the Old English Wine Standard.
The tankard has a polished silver grey finish, there is possibly a repair to the handle terminal (see detailed images).
Weight: 890g
Height to top of dome lid: 19cm (7.5in).
Shipping
I ship worldwide using UPS or equivalent fully tracked service.
UK: £8.00, Europe £15.00, USA: £35.00
SOLD
A PAIR OF ANTIQUE DUTCH PEWTER WRIGGLE ...
Item Ref
P-279
A good pair of antique Dutch pewter beakers decorated with panels of floral design in wriggle work. The beakers are of typical tapering form standing on a stepped foot. There is a clear 'rose and crown' makers mark to the base with the date 1751 and the initials IN. There are also ownership initials 'DI' stamped close to the maker's mark. The floral decoration is most attractive with a simple naive charm.
Circa 1750.
The condition is excellent with a lightly polished silver grey finish and slight traces of oxide. There is a small split on one of the rims (see image).
Size:
Height: 6.75in (17.0cm).
Base diameter: 3.50in (8.70cm).
Rim diameter: 4.25in (10.50cm).
Shipping costs:
UK: £15.00
Europe: £30.00
USA/Canada: £40.00
Other countries: Please ask.
Stock number: P-279.
Circa 1750.
The condition is excellent with a lightly polished silver grey finish and slight traces of oxide. There is a small split on one of the rims (see image).
Size:
Height: 6.75in (17.0cm).
Base diameter: 3.50in (8.70cm).
Rim diameter: 4.25in (10.50cm).
Shipping costs:
UK: £15.00
Europe: £30.00
USA/Canada: £40.00
Other countries: Please ask.
Stock number: P-279.
SOLD
ANTIQUE ENGLISH PEWTER MULTIPLE REEDED 15in DISH ...
Item Ref
P-078g
Description:
Antique English pewter multiple reed dish of almost 15 inch diameter by John Batcheler of Bristol, England, who worked 1676-1708.
Attribution of the touch mark to John Batcheler is recent, earlier sources attribute it to John French III as is shown by the collectors labels to the reverse.
The dish is very well made with deep cast multiple reeding to the outer edge, The rim also bears a scratch engraved or wriggled X, or maybe crossed quills. (see close up image). There is also a single incised line around the bowl of the dish. The reverse has the worn touch marks now attributed to John Batcheler. The booge is very well hammered as can be seen in the close up image.
Condition:
The dish is in good condition with a polished finish to the front, there are some knife marks to the front showing signs of use. The reverse is unpolished with some light oxide.
Repairs: There is possibly a very old small repair to the reverse rim, but I can not be sure of this.
Size: 14.875 inch diameter (37.60cm).
Weight: 1330 grams.
Pewterer's reference number:
Pewter Society: - PS39.
Cotterell: Old Pewter: Its Makers and Marks - OP295.
Shipping costs:
UK: £10.00
Europe: £20.00
USA/Canada: £30.00
Other countries: Please ask.
Stock number: P-078g.
Antique English pewter multiple reed dish of almost 15 inch diameter by John Batcheler of Bristol, England, who worked 1676-1708.
Attribution of the touch mark to John Batcheler is recent, earlier sources attribute it to John French III as is shown by the collectors labels to the reverse.
The dish is very well made with deep cast multiple reeding to the outer edge, The rim also bears a scratch engraved or wriggled X, or maybe crossed quills. (see close up image). There is also a single incised line around the bowl of the dish. The reverse has the worn touch marks now attributed to John Batcheler. The booge is very well hammered as can be seen in the close up image.
Condition:
The dish is in good condition with a polished finish to the front, there are some knife marks to the front showing signs of use. The reverse is unpolished with some light oxide.
Repairs: There is possibly a very old small repair to the reverse rim, but I can not be sure of this.
Size: 14.875 inch diameter (37.60cm).
Weight: 1330 grams.
Pewterer's reference number:
Pewter Society: - PS39.
Cotterell: Old Pewter: Its Makers and Marks - OP295.
Shipping costs:
UK: £10.00
Europe: £20.00
USA/Canada: £30.00
Other countries: Please ask.
Stock number: P-078g.
SOLD
A CHARLES II TRIPLE REEDED PEWTER PLATE ...
Item Ref
P-125
Description:
Antique English pewter triple reeded plate, the rim has a narrow cast reeded edge. The front rim bears the hall marks of Christopher Clarke of London who worked from 1661. The rim also is engraved with the ownership initials 'E.F'. The reverse rim bears the touchmark of Christopher Clarke and also has numerous collectors labels / marks.
Condition:
The plate is in excellent condition with a very lightly polished finish to the front, with some small traces of oxide. The reverse is also lightly polished with traces of oxide.
Repairs: There are no repairs.
Size: 9.25 inch diameter (23.50cm). Rim width is 1.50in (3.90cm), 32.50%.
Weight: 447 grams.
Pewterer's reference number:
Pewter Society: PS1677.
Cotterell: Old Pewter: Its Makers and Marks: OP925A.
Provenance:
Ex Cyril Minchin collection number 484, TM925A.
Ex John Douglas collection number P14.
Shipping costs:
UK: £10.00
Europe: £20.00
USA/Canada: £30.00
Other countries: Please ask.
Stock number: P-125.
Antique English pewter triple reeded plate, the rim has a narrow cast reeded edge. The front rim bears the hall marks of Christopher Clarke of London who worked from 1661. The rim also is engraved with the ownership initials 'E.F'. The reverse rim bears the touchmark of Christopher Clarke and also has numerous collectors labels / marks.
Condition:
The plate is in excellent condition with a very lightly polished finish to the front, with some small traces of oxide. The reverse is also lightly polished with traces of oxide.
Repairs: There are no repairs.
Size: 9.25 inch diameter (23.50cm). Rim width is 1.50in (3.90cm), 32.50%.
Weight: 447 grams.
Pewterer's reference number:
Pewter Society: PS1677.
Cotterell: Old Pewter: Its Makers and Marks: OP925A.
Provenance:
Ex Cyril Minchin collection number 484, TM925A.
Ex John Douglas collection number P14.
Shipping costs:
UK: £10.00
Europe: £20.00
USA/Canada: £30.00
Other countries: Please ask.
Stock number: P-125.
SOLD
QUEEN ANNE PEWTER TRIPLE REEDED SEMI-BROAD RIM ...
Item Ref
P-126
Description:
Antique English pewter triple reeded plate of 10.75 inch diameter with a semi-broad rim. The front rim bears a set of hall marks for Edmund Embris of Blandford Forum, Dorset who worked 1697 - 1720, The rim also has punched ownership initials 'ES'. The reverse bears the touch mark of Edmund Embris.
Condition:
The plate is in excellent condition with a very lightly polished finish to the front, with traces of oxide. The reverse is also lightly polished with some light oxide.
Repairs: There are no repairs.
Size: 10.75 inch diameter (27.30cm). The rim width is 1.75 inch (4.50cm) 32.50%.
Weight: 702 grams.
Pewterer's reference number:
Pewter Society: PS3157.
Cotterell: Old Pewter: Its Makers and Marks: OP1561.
Provenance:
Ex J Douglas Collection (no P12).
Shipping costs:
UK: £10.00
Europe: £20.00
USA/Canada: £30.00
Other countries: Please ask.
Stock number: P-126.
Antique English pewter triple reeded plate of 10.75 inch diameter with a semi-broad rim. The front rim bears a set of hall marks for Edmund Embris of Blandford Forum, Dorset who worked 1697 - 1720, The rim also has punched ownership initials 'ES'. The reverse bears the touch mark of Edmund Embris.
Condition:
The plate is in excellent condition with a very lightly polished finish to the front, with traces of oxide. The reverse is also lightly polished with some light oxide.
Repairs: There are no repairs.
Size: 10.75 inch diameter (27.30cm). The rim width is 1.75 inch (4.50cm) 32.50%.
Weight: 702 grams.
Pewterer's reference number:
Pewter Society: PS3157.
Cotterell: Old Pewter: Its Makers and Marks: OP1561.
Provenance:
Ex J Douglas Collection (no P12).
Shipping costs:
UK: £10.00
Europe: £20.00
USA/Canada: £30.00
Other countries: Please ask.
Stock number: P-126.
SOLD
WILLIAM & MARY TRIPLE REEDED PLATE, HAMMERED ...
Item Ref
P-129
Description:
Antique English pewter triple reeded plate of 9.50 inch diameter with a semi-broad rim. The plate has a cast triple reeded edge and is finely hammered all over to include the rim. The front rim bears the hall marks of Thomas Powell of London who worked 1676 - 1715, opposite these is a very well struck London export stamp of two angels supporting a crown with 'London' under. Thomas Powell is recorded as being a prolific exporter of pewter, the style of this export stamp would suggest that this plate was destined for Europe. The rear of the plate has two partial 'rose & crown' touchmarks with a cross engraved between them.
Condition:
The plate is in excellent condition with a very lightly polished finish to the front, with traces of oxide in some of the hammer marks. The reverse is also lightly polished with some light oxide.
Repairs: There are no repairs.
Size: 9.50 inch diameter (24.20cm). The rim width is 1.375 inch (3.00cm) 25.00%.
Weight: 543 grams.
Pewterer's reference number:
Pewter Society: PS7471.
Cotterell: Old Pewter: Its Makers and Marks: OP3750.
Provenance:
Ex J Douglas Collection (no P53).
Shipping costs:
UK: £10.00
Europe: £20.00
USA/Canada: £30.00
Other countries: Please ask.
Stock number: P-129.
Antique English pewter triple reeded plate of 9.50 inch diameter with a semi-broad rim. The plate has a cast triple reeded edge and is finely hammered all over to include the rim. The front rim bears the hall marks of Thomas Powell of London who worked 1676 - 1715, opposite these is a very well struck London export stamp of two angels supporting a crown with 'London' under. Thomas Powell is recorded as being a prolific exporter of pewter, the style of this export stamp would suggest that this plate was destined for Europe. The rear of the plate has two partial 'rose & crown' touchmarks with a cross engraved between them.
Condition:
The plate is in excellent condition with a very lightly polished finish to the front, with traces of oxide in some of the hammer marks. The reverse is also lightly polished with some light oxide.
Repairs: There are no repairs.
Size: 9.50 inch diameter (24.20cm). The rim width is 1.375 inch (3.00cm) 25.00%.
Weight: 543 grams.
Pewterer's reference number:
Pewter Society: PS7471.
Cotterell: Old Pewter: Its Makers and Marks: OP3750.
Provenance:
Ex J Douglas Collection (no P53).
Shipping costs:
UK: £10.00
Europe: £20.00
USA/Canada: £30.00
Other countries: Please ask.
Stock number: P-129.
SOLD
ANTIQUE ENGLISH PEWTER 1 QUART DOME LID ...
Item Ref
P-202
A fine antique English pewter lidded tankard of 32 fluid ounce capacity, by Robert Bush of Bristol, Cott O.P 737.
The Tankard is of ‘tulip’ form, with double dome lid and an open chair back thumb piece, double scroll handle with fish tail terminal.
The inside base is struck with a makers maker’s touch mark.
The tankard is in excellent condition with a polished silver grey finish.
Circa 1770.
Size:
Height: 7.5 in (19.0cm).
Shipping costs:
UK: £15.00
Europe: £25.00
USA/Canada: £40.00
Other countries: Please ask.
The Tankard is of ‘tulip’ form, with double dome lid and an open chair back thumb piece, double scroll handle with fish tail terminal.
The inside base is struck with a makers maker’s touch mark.
The tankard is in excellent condition with a polished silver grey finish.
Circa 1770.
Size:
Height: 7.5 in (19.0cm).
Shipping costs:
UK: £15.00
Europe: £25.00
USA/Canada: £40.00
Other countries: Please ask.
SOLD
ENGLISH PEWTER CHARLES II TRIPLE REEDED PLATE, ...
Item Ref
P-058
Description:
Antique English pewter triple reeded plate of 8.75 inch diameter. The front rim bears a very well struck set of hall marks for John Tubb of London who worked from 1686, these are of note as Tubb was one of a small group of Pewterer's who incorporated 'black letters' into their hallmarks, (see Journal of the Pewter Society, Autumn 1997 p32). The rim also is engraved with the ownership initials 'MH'. The reverse bears the touchmark of John Tubb.
Condition:
The plate is in excellent condition with a very lightly polished finish to the front, with some small traces of oxide. The reverse is also lightly polished with some light oxide.
Repairs: There are no repairs.
Size: 8.75 inch diameter (22.70cm).
Weight: 383 grams.
Pewterer's reference number:
Pewter Society: PS9502.
Cotterell: Old Pewter: Its Makers and Marks: OP4821.
Shipping costs:
UK: £10.00
Europe: £20.00
USA/Canada: £30.00
Other countries: Please ask.
Stock number: P-058.
Antique English pewter triple reeded plate of 8.75 inch diameter. The front rim bears a very well struck set of hall marks for John Tubb of London who worked from 1686, these are of note as Tubb was one of a small group of Pewterer's who incorporated 'black letters' into their hallmarks, (see Journal of the Pewter Society, Autumn 1997 p32). The rim also is engraved with the ownership initials 'MH'. The reverse bears the touchmark of John Tubb.
Condition:
The plate is in excellent condition with a very lightly polished finish to the front, with some small traces of oxide. The reverse is also lightly polished with some light oxide.
Repairs: There are no repairs.
Size: 8.75 inch diameter (22.70cm).
Weight: 383 grams.
Pewterer's reference number:
Pewter Society: PS9502.
Cotterell: Old Pewter: Its Makers and Marks: OP4821.
Shipping costs:
UK: £10.00
Europe: £20.00
USA/Canada: £30.00
Other countries: Please ask.
Stock number: P-058.
SOLD
ENGLISH PEWTER 17th CENTURY NARROW RIM 8in ...
Item Ref
P-072
Description:
Antique English pewter narrow rim plate with reeded edge, the plate is by an unknown maker and has four well struck 'hallmarks' to the outer edge of the bowl.
Ownership initials 'SF' are struck to the rim opposite the hallmarks.
Condition:
The plate is in excellent condition with a very lightly polished finish to the front, slightly darker to the rim, there are some knife marks to the front showing signs of use. The reverse is unpolished with very light oxide.
Repairs: There are no repairs.
Size: 8.375 inch diameter (21.20cm). Rim width is 0.625in (1.50cm).
Weight: 342 grams.
Pewterer's reference number:
Pewter Society: .
Cotterell: Old Pewter: Its Makers and Marks .
Shipping costs:
UK: £10.00
Europe: £20.00
USA/Canada: £30.00
Other countries: Please ask.
Stock number: P-072.
Antique English pewter narrow rim plate with reeded edge, the plate is by an unknown maker and has four well struck 'hallmarks' to the outer edge of the bowl.
Ownership initials 'SF' are struck to the rim opposite the hallmarks.
Condition:
The plate is in excellent condition with a very lightly polished finish to the front, slightly darker to the rim, there are some knife marks to the front showing signs of use. The reverse is unpolished with very light oxide.
Repairs: There are no repairs.
Size: 8.375 inch diameter (21.20cm). Rim width is 0.625in (1.50cm).
Weight: 342 grams.
Pewterer's reference number:
Pewter Society: .
Cotterell: Old Pewter: Its Makers and Marks .
Shipping costs:
UK: £10.00
Europe: £20.00
USA/Canada: £30.00
Other countries: Please ask.
Stock number: P-072.
SOLD
ANTIQUE SCOTTISH PEWTER 1 QUART SPOUTED ‘TULIP’ ...
Item Ref
KG3
Antique Scottish pewter 1 quart spouted measure of tulip shape, standing on a large flared foot, the handle is double scroll with fish tail terminal.
The measure is clearly marked to the left of the handle ‘GLASw.53’ along with a very clear example of the city arms, ‘a tree with a bird on top, a bell hanging from the tree, a salmon with a ring in its mouth across the tree’. There is also an inspection mark to the right and left of the handle that has been applied upside down, it looks like ‘B of S’, which is for ‘Stirling Royal Burgh’.
The condition is excellent with a dull grey polished finish.
Circa 1852.
Size:
Height: 7.0in (17.8cm)
Top diameter: 4.5in (11.3cm).
Base diameter: 4.5in (11.3cm)
Shipping costs:
UK: £10.00
Europe: £18.00
USA/Canada: £25.00
Other countries: Please ask.
The measure is clearly marked to the left of the handle ‘GLASw.53’ along with a very clear example of the city arms, ‘a tree with a bird on top, a bell hanging from the tree, a salmon with a ring in its mouth across the tree’. There is also an inspection mark to the right and left of the handle that has been applied upside down, it looks like ‘B of S’, which is for ‘Stirling Royal Burgh’.
The condition is excellent with a dull grey polished finish.
Circa 1852.
Size:
Height: 7.0in (17.8cm)
Top diameter: 4.5in (11.3cm).
Base diameter: 4.5in (11.3cm)
Shipping costs:
UK: £10.00
Europe: £18.00
USA/Canada: £25.00
Other countries: Please ask.
SOLD
ANTIQUE FRENCH PEWTER PORRINGER, MAKER'S CROWNED HAMMER ...
Item Ref
P-209
Antique French pewter twin handled porringer, of particular note is the clear makers mark; a crowned hammer with the initials RA.
Circa 1600.
The condition is excellent with a fine polished silver grey finish. There is a old where one of the handles joins the bowl (see image).
Size:
Bowl diameter: 5.00in (12.5cm).
Ear to ear: 8.00in (20.50cm).
Shipping costs:
UK: £15.00
Europe: £30.00
USA/Canada: £40.00
Other countries: Please ask.
Stock number: P-209.
Circa 1600.
The condition is excellent with a fine polished silver grey finish. There is a old where one of the handles joins the bowl (see image).
Size:
Bowl diameter: 5.00in (12.5cm).
Ear to ear: 8.00in (20.50cm).
Shipping costs:
UK: £15.00
Europe: £30.00
USA/Canada: £40.00
Other countries: Please ask.
Stock number: P-209.
SOLD
ANTIQUE JERSEY LIDDED 1 QUART IMPERIAL FLAGON ...
Item Ref
A027
Antique Jersey flagon of 1 quart Imperial capacity, heart shaped lid with twin acorn thumb piece.
There is a clear maker’s mark for John de St. Croix, see Cott O.P 1360. The touch mark is under the lid.
Owners initials ‘MBT’ are engraved on the handle.
The flagon is in excellent condition with a polished silver grey finish, with no repairs.
Circa 1750.
Size:
Height: 8.50in (22cm).
Shipping costs:
UK: £10.00
Europe: £20.00
USA/Canada: £30.00
Other countries: Please ask.
There is a clear maker’s mark for John de St. Croix, see Cott O.P 1360. The touch mark is under the lid.
Owners initials ‘MBT’ are engraved on the handle.
The flagon is in excellent condition with a polished silver grey finish, with no repairs.
Circa 1750.
Size:
Height: 8.50in (22cm).
Shipping costs:
UK: £10.00
Europe: £20.00
USA/Canada: £30.00
Other countries: Please ask.
SOLD
ANTIQUE ENGLISH PEWTER 16in MULTIPLE REED DISH ...
Item Ref
P-055
Description:
Antique English pewter multiple reed dish by Robert Garratt of London, England, who worked 1695-1734. There are ownership initials 'IC' to the front rim along with a clear set of hall marks. The reverse rim has a partial touch mark.
Condition:
The dish is in good condition with a polished finish to the front, there are some knife marks to the front showing signs of use. The reverse is unpolished with some light oxide.
Repairs: There are two old repairs to rim splits that are only slightly visible on the face.
Size: 16.375 inch diameter (41.50cm).
Weight: 1682 grams.
Pewterer's reference number:
Pewter Society: - PS3706.
Cotterell: Old Pewter: Its Makers and Marks - OP5628.
Shipping costs:
UK: £12.00
Europe: £20.00
USA/Canada: £30.00
Other countries: Please ask.
Stock number: P-055.
Antique English pewter multiple reed dish by Robert Garratt of London, England, who worked 1695-1734. There are ownership initials 'IC' to the front rim along with a clear set of hall marks. The reverse rim has a partial touch mark.
Condition:
The dish is in good condition with a polished finish to the front, there are some knife marks to the front showing signs of use. The reverse is unpolished with some light oxide.
Repairs: There are two old repairs to rim splits that are only slightly visible on the face.
Size: 16.375 inch diameter (41.50cm).
Weight: 1682 grams.
Pewterer's reference number:
Pewter Society: - PS3706.
Cotterell: Old Pewter: Its Makers and Marks - OP5628.
Shipping costs:
UK: £12.00
Europe: £20.00
USA/Canada: £30.00
Other countries: Please ask.
Stock number: P-055.
SOLD
ANTIQUE ENGLISH PEWTER 9in PLAIN RIM PLATE ...
Item Ref
PP70
Description:
Antique English pewter plain rim plate by John Williams of Falmouth, Cornwall, England, who worked 1737-1761. The plate has two good touch marks to the reverse. The reverse rim has the scratched initials 'AA'.
Note: Items by Cornish Pewterer's are considered scarce. A single reeded plate by John Williams is in the Royal Cornwall Museum, item number 1933.15.
Condition:
The plate is in good condition with a polished finish to the front, there are some knife marks to the front showing signs of use. The reverse is also polished.
Repairs: There are no repairs.
Size: 9.75 inch diameter (24.70cm).
Weight: 516 grams.
Pewterer's reference number:
Pewter Society: - PS10148.
Cotterell: Old Pewter: Its Makers and Marks - OP5164.
Shipping costs:
UK: £10.00
Europe: £20.00
USA/Canada: £30.00
Other countries: Please ask.
Stock number: PP70.
Antique English pewter plain rim plate by John Williams of Falmouth, Cornwall, England, who worked 1737-1761. The plate has two good touch marks to the reverse. The reverse rim has the scratched initials 'AA'.
Note: Items by Cornish Pewterer's are considered scarce. A single reeded plate by John Williams is in the Royal Cornwall Museum, item number 1933.15.
Condition:
The plate is in good condition with a polished finish to the front, there are some knife marks to the front showing signs of use. The reverse is also polished.
Repairs: There are no repairs.
Size: 9.75 inch diameter (24.70cm).
Weight: 516 grams.
Pewterer's reference number:
Pewter Society: - PS10148.
Cotterell: Old Pewter: Its Makers and Marks - OP5164.
Shipping costs:
UK: £10.00
Europe: £20.00
USA/Canada: £30.00
Other countries: Please ask.
Stock number: PP70.
SOLD
ANTIQUE ENGLISH PEWTER TANKARD 1 QUART OEWS, ...
Item Ref
P-074
Description:
A lidded tankard of 1 quart OEWS capacity, of tulip form with a double dome lid with open chairback thumb piece. The body has fillet to the middle of the drum and stands on a flared foot. The handle is of double scroll form with a fishtail terminal. There are no makers marks but this style of tankard is often associated with Bristol makers. The tankard would date to circa 1760.
Condition:
Excellent condition with a polished silver grey finish and some small traces of light oxide.
Repairs: There are no repairs that I could detect.
Size:
Height to top of thumb piece: 7.50 in (19.00cm).
Base diameter: 4.375in (11.2cm).
Capacity: 33.40floz, 1 quart Old English Wine Standard.
Weight: 857 grams.
Shipping costs:
UK: £10.00
Europe: £20.00
USA/Canada: £30.00
Other countries: Please ask.
Stock number: P-074.
A lidded tankard of 1 quart OEWS capacity, of tulip form with a double dome lid with open chairback thumb piece. The body has fillet to the middle of the drum and stands on a flared foot. The handle is of double scroll form with a fishtail terminal. There are no makers marks but this style of tankard is often associated with Bristol makers. The tankard would date to circa 1760.
Condition:
Excellent condition with a polished silver grey finish and some small traces of light oxide.
Repairs: There are no repairs that I could detect.
Size:
Height to top of thumb piece: 7.50 in (19.00cm).
Base diameter: 4.375in (11.2cm).
Capacity: 33.40floz, 1 quart Old English Wine Standard.
Weight: 857 grams.
Shipping costs:
UK: £10.00
Europe: £20.00
USA/Canada: £30.00
Other countries: Please ask.
Stock number: P-074.
SOLD
ANTIQUE SCOTTISH PEWTER SINGLE REEDED 14 INCH ...
Item Ref
P-078a
Description:
Antique Scottish pewter single reeded deep welled dish. The dish is very well made with excellent hammer marks to the booge, clearly visible to the reverse.
There is a probable marriage engraving to the reverse, 'AB heart IW' followed by a small flower. There are no visible makers marks.
Condition:
The dish is in good condition with a polished finish to the front, there are some knife marks to the front showing signs of use. The reverse is unpolished with grey oxide.
Repairs: There are no repairs that I can detect.
Size: 14.625 inch diameter (37.00cm).
Depth: 2.00 inch (5.00cm)
Weight: 1456 grams.
Pewterer's reference number:
Pewter Society: - .
Cotterell: Old Pewter: Its Makers and Marks - .
Shipping costs:
UK: £10.00
Europe: £20.00
USA/Canada: £30.00
Other countries: Please ask.
Stock number: P-078a.
Antique Scottish pewter single reeded deep welled dish. The dish is very well made with excellent hammer marks to the booge, clearly visible to the reverse.
There is a probable marriage engraving to the reverse, 'AB heart IW' followed by a small flower. There are no visible makers marks.
Condition:
The dish is in good condition with a polished finish to the front, there are some knife marks to the front showing signs of use. The reverse is unpolished with grey oxide.
Repairs: There are no repairs that I can detect.
Size: 14.625 inch diameter (37.00cm).
Depth: 2.00 inch (5.00cm)
Weight: 1456 grams.
Pewterer's reference number:
Pewter Society: - .
Cotterell: Old Pewter: Its Makers and Marks - .
Shipping costs:
UK: £10.00
Europe: £20.00
USA/Canada: £30.00
Other countries: Please ask.
Stock number: P-078a.
SOLD
GEORGE IV PEWTER PLAIN RIM PLATE WITH ...
Item Ref
P-127
Description:
Antique English pewter plain rim plate of 9.75 inch diameter. The front rim is engraved with the crown of George IV above the initials 'WP'. The reverse bears the touchmark of Thomas Dean Alderson of London who worked 1796 - 1852, along with a London label and two crowned X.
Thomas Dean Alderson is very well known for being the Pewterer to King George IV and for producing the pewter dinner service for the coronation banquet held on 19th July 1821. This plate is identical to those made for the coronation banquet and the style of the engraving is the same; this form of Royal coronet denotes the child of the son of the Sovereign. Who this is remains a mystery; this plate is possibly a unique one off item.
Condition:
The plate is in excellent condition with a very lightly polished finish to the front, the reverse is also lightly polished.
Repairs: There are no repairs.
Size: 9.75 inch diameter (24.70cm).
Weight: 597 grams.
Pewterer's reference number:
Pewter Society: PS13.
Cotterell: Old Pewter: Its Makers and Marks: OP40.
Provenance:
Ex J Douglas Collection (no P250).
Shipping costs:
UK: £10.00
Europe: £20.00
USA/Canada: £30.00
Other countries: Please ask.
Stock number: P-127.
Antique English pewter plain rim plate of 9.75 inch diameter. The front rim is engraved with the crown of George IV above the initials 'WP'. The reverse bears the touchmark of Thomas Dean Alderson of London who worked 1796 - 1852, along with a London label and two crowned X.
Thomas Dean Alderson is very well known for being the Pewterer to King George IV and for producing the pewter dinner service for the coronation banquet held on 19th July 1821. This plate is identical to those made for the coronation banquet and the style of the engraving is the same; this form of Royal coronet denotes the child of the son of the Sovereign. Who this is remains a mystery; this plate is possibly a unique one off item.
Condition:
The plate is in excellent condition with a very lightly polished finish to the front, the reverse is also lightly polished.
Repairs: There are no repairs.
Size: 9.75 inch diameter (24.70cm).
Weight: 597 grams.
Pewterer's reference number:
Pewter Society: PS13.
Cotterell: Old Pewter: Its Makers and Marks: OP40.
Provenance:
Ex J Douglas Collection (no P250).
Shipping costs:
UK: £10.00
Europe: £20.00
USA/Canada: £30.00
Other countries: Please ask.
Stock number: P-127.
SOLD
ANTIQUE ENGLISH PEWTER 16.5 IN DIA TRIPLE ...
Item Ref
A004
A fine antique English pewter 16.5 inch diameter triple reeded dish, by John Greenbank of Worcester.
See: Homer & Hall, Provincial Pewterers.
Maker’s hallmarks to the front rim, along with a marriage triad ‘C over IA’
The dish has a good clear set of maker’s marks to the reverse.
The dish is in excellent condition with a polished silver grey finish.
Circa 1680.
Size:
Diameter: 16.5 in (42cm).
Shipping costs:
UK: £10.00
Europe: £25.00
USA/Canada: £40.00
Other countries: Please ask.
See: Homer & Hall, Provincial Pewterers.
Maker’s hallmarks to the front rim, along with a marriage triad ‘C over IA’
The dish has a good clear set of maker’s marks to the reverse.
The dish is in excellent condition with a polished silver grey finish.
Circa 1680.
Size:
Diameter: 16.5 in (42cm).
Shipping costs:
UK: £10.00
Europe: £25.00
USA/Canada: £40.00
Other countries: Please ask.
SOLD
ANTIQUE JERSEY LIDDED 1 QUART IMPERIAL FLAGON ...
Item Ref
A003
Antique Jersey flagon of 1 quart Imperial capacity, heart shaped lid with twin acorn thumb piece.
There is a clear maker’s mark for John de St. Croix, see Cott O.P 1360, and a clear ‘Crowned GR’ verification to the rim.
The flagon is in excellent condition with a polished silver grey finish.
Circa 1750.
Size:
Height: 8.25 in (21cm)
Shipping costs:
UK: £7.00
Europe: £20.00
USA/Canada: £30.00
Other countries: Please ask.
There is a clear maker’s mark for John de St. Croix, see Cott O.P 1360, and a clear ‘Crowned GR’ verification to the rim.
The flagon is in excellent condition with a polished silver grey finish.
Circa 1750.
Size:
Height: 8.25 in (21cm)
Shipping costs:
UK: £7.00
Europe: £20.00
USA/Canada: £30.00
Other countries: Please ask.
SOLD
ANTIQUE ENGLISH PEWTER 15in DISH BY JOHN ...
Item Ref
P-057
Description:
Antique English pewter single reed dish by John Shorey I of London, England, who worked 1683-1722. There are ownership initials 'IWG' to the front rim along with a clear set of hall marks. The plate has an inscribed line to the bowl.
Condition:
The dish is in good condition with a polished finish to the front, there are some knife marks to the front showing signs of use. The reverse is unpolished with some heavy oxide.
Repairs: There is a old repair to a rim split that is only visible on the reverse.
Size: 15.00 inch diameter (38.00cm).
Weight: 1211 grams.
Pewterer's reference number:
Pewter Society: - PS8461.
Cotterell: Old Pewter: Its Makers and Marks - OP4262.
Shipping costs:
UK: £12.00
Europe: £20.00
USA/Canada: £30.00
Other countries: Please ask.
Stock number: P-057.
Antique English pewter single reed dish by John Shorey I of London, England, who worked 1683-1722. There are ownership initials 'IWG' to the front rim along with a clear set of hall marks. The plate has an inscribed line to the bowl.
Condition:
The dish is in good condition with a polished finish to the front, there are some knife marks to the front showing signs of use. The reverse is unpolished with some heavy oxide.
Repairs: There is a old repair to a rim split that is only visible on the reverse.
Size: 15.00 inch diameter (38.00cm).
Weight: 1211 grams.
Pewterer's reference number:
Pewter Society: - PS8461.
Cotterell: Old Pewter: Its Makers and Marks - OP4262.
Shipping costs:
UK: £12.00
Europe: £20.00
USA/Canada: £30.00
Other countries: Please ask.
Stock number: P-057.
SOLD
ANTIQUE ENGLISH PEWTER 9in PLAIN RIM PLATE ...
Item Ref
PP69
Description:
Antique English pewter plain rim plate by John Williams of Falmouth, Cornwall, England, who worked 1737-1761. The plate has two partial touch marks to the reverse. The reverse rim has the scratched initials 'AA' along with some old collectors stock numbers.
Note: Items by Cornish Pewterer's are considered scarce. A single reeded plate by John Williams is in the Royal Cornwall Museum, item number 1933.15.
Condition:
The plate is in good condition with an unpolished finish to the front, there are some knife marks to the front showing signs of use. The reverse is also unpolished, both faces have some very light oxide.
Repairs: There are no repairs.
Size: 9.75 inch diameter (24.70cm).
Weight: 541 grams.
Pewterer's reference number:
Pewter Society: - PS10148.
Cotterell: Old Pewter: Its Makers and Marks - OP5164.
Shipping costs:
UK: £10.00
Europe: £20.00
USA/Canada: £30.00
Other countries: Please ask.
Stock number: PP69.
Antique English pewter plain rim plate by John Williams of Falmouth, Cornwall, England, who worked 1737-1761. The plate has two partial touch marks to the reverse. The reverse rim has the scratched initials 'AA' along with some old collectors stock numbers.
Note: Items by Cornish Pewterer's are considered scarce. A single reeded plate by John Williams is in the Royal Cornwall Museum, item number 1933.15.
Condition:
The plate is in good condition with an unpolished finish to the front, there are some knife marks to the front showing signs of use. The reverse is also unpolished, both faces have some very light oxide.
Repairs: There are no repairs.
Size: 9.75 inch diameter (24.70cm).
Weight: 541 grams.
Pewterer's reference number:
Pewter Society: - PS10148.
Cotterell: Old Pewter: Its Makers and Marks - OP5164.
Shipping costs:
UK: £10.00
Europe: £20.00
USA/Canada: £30.00
Other countries: Please ask.
Stock number: PP69.
SOLD
ANTIQUE GUERNSEY PEWTER 1/2 POT LIDDED FLAGON ...
Item Ref
P-061
Antique Guernsey flagon of 1/2 pot capacity, heart shaped lid with twin acorn thumb piece. This style of flagon is know as 'type 2'.
The lid bears the maker's mark 'NLC' with two Tudor roses and a Guernsey, these marks are attributed to Nicolas Le Cheminant, who worked 1780-1830. There are also ownership initials 'IP' stamped on the lid. There are also the 'five-leafed rose' and 'fleur-de-lys' Guernsey verification seals stamped below the rim.
The flagon is in excellent condition with a polished silver-grey finish, note that the inside is coated with possibly paint from the flagon being used to hold artists brushes or similar. (This is reflected in the price).
Circa 1800.
Size:
Height: 8.50 in (21.50cm).
Base diameter: 4.125in (10.00cm).
Shipping costs:
UK: £12.00
Europe: £30.00
USA/Canada: £40.00
Other countries: Please ask.
Stock number: P-061.
The lid bears the maker's mark 'NLC' with two Tudor roses and a Guernsey, these marks are attributed to Nicolas Le Cheminant, who worked 1780-1830. There are also ownership initials 'IP' stamped on the lid. There are also the 'five-leafed rose' and 'fleur-de-lys' Guernsey verification seals stamped below the rim.
The flagon is in excellent condition with a polished silver-grey finish, note that the inside is coated with possibly paint from the flagon being used to hold artists brushes or similar. (This is reflected in the price).
Circa 1800.
Size:
Height: 8.50 in (21.50cm).
Base diameter: 4.125in (10.00cm).
Shipping costs:
UK: £12.00
Europe: £30.00
USA/Canada: £40.00
Other countries: Please ask.
Stock number: P-061.
SOLD
ANTIQUE JERSEY LIDDED 1 QUART IMPERIAL FLAGON ...
Item Ref
A012
Antique Jersey flagon of 1 quart Imperial capacity, heart shaped lid with twin acorn thumb piece.
There is a clear maker’s mark on the pin attaching the lid to the handle, this ‘cross’ mark is attributed to John de St. Croix, see Cott O.P 1360. There is a clear ‘Crowned GR’ verification to the rim.
The flagon is in excellent condition with a polished silver grey finish. The handle has at some point in time been re-attached, but has been very well done.
Circa 1750.
Size:
Height: 8.25 in (21cm)
Shipping costs:
UK: £10.00
Europe: £20.00
USA/Canada: £30.00
Other countries: Please ask.
There is a clear maker’s mark on the pin attaching the lid to the handle, this ‘cross’ mark is attributed to John de St. Croix, see Cott O.P 1360. There is a clear ‘Crowned GR’ verification to the rim.
The flagon is in excellent condition with a polished silver grey finish. The handle has at some point in time been re-attached, but has been very well done.
Circa 1750.
Size:
Height: 8.25 in (21cm)
Shipping costs:
UK: £10.00
Europe: £20.00
USA/Canada: £30.00
Other countries: Please ask.
SOLD
ANTIQUE SCOTTISH PEWTER LIDDED HALF PINT MEASURE, ...
Item Ref
BD2
Antique Scottish pewter lidded 1/2 pint measure with ‘Crown Imperial’ to the lid; shell thumb piece to lid.
Verification marks to the left of handle for Glasgow, but no makers’ marks.
The measure is in excellent condition with a polished silver grey finish. There are no repairs or damage.
Circa 1850.
Size:
Height: 5.25 in (14cm) to top of thumb piece.
Base diameter: 2.60in (6.6cm).
Rim Diameter: 2.75in (7.0cm).
Shipping costs:
UK: £5.00
Europe: £10.00
USA/Canada: £15.00
Other countries: Please ask.
SOLD
ANTIQUE ENGLISH PEWTER TAVERN MUG, MAKER E ...
Item Ref
P-248
A good one pint tavern mug, probably by the maker recorded as E M, circa 1730.
The mug has a slightly tapering plain body and stands on a stepped foot. The handle has a tongued thumb rest and a ball terminal at the lower end. There is a faint makers mark to the inside of the base. The mug is not verified and has no capacity label, so we can assume that this was a tavern mug or made for private use.
An identical mug is published as item 150, page 58 in 'Early English Pewter Drinking Mugs' by Carl Ricketts.
Provenance:
Albert Bartram collection.
Condition:
Excellent condition with a lightly polished silver grey finish and some small traces of light oxide.
Repairs: There is a very small repaired split to the righthand side of the handle (see images).
Size:
Height to rim: 4.50 in (11.50cm).
Capacity: 20.00floz.
Pewterer's reference number:
Pewter Society: - PS17822.
Cotterell: Old Pewter: Its Makers and Marks - not recorded.
Shipping costs:
UK: £15.00
Europe: £30.00
USA/Canada: £40.00
Other countries: Please ask.
Stock number: P-248.
The mug has a slightly tapering plain body and stands on a stepped foot. The handle has a tongued thumb rest and a ball terminal at the lower end. There is a faint makers mark to the inside of the base. The mug is not verified and has no capacity label, so we can assume that this was a tavern mug or made for private use.
An identical mug is published as item 150, page 58 in 'Early English Pewter Drinking Mugs' by Carl Ricketts.
Provenance:
Albert Bartram collection.
Condition:
Excellent condition with a lightly polished silver grey finish and some small traces of light oxide.
Repairs: There is a very small repaired split to the righthand side of the handle (see images).
Size:
Height to rim: 4.50 in (11.50cm).
Capacity: 20.00floz.
Pewterer's reference number:
Pewter Society: - PS17822.
Cotterell: Old Pewter: Its Makers and Marks - not recorded.
Shipping costs:
UK: £15.00
Europe: £30.00
USA/Canada: £40.00
Other countries: Please ask.
Stock number: P-248.
SOLD
ANTIQUE SCOTTISH PEWTER LIDDED HALF PINT MEASURE ...
Item Ref
BD3
Antique Scottish pewter lidded 1/2 pint measure of early form; shell thumb piece to lid.
Numerous verification marks to the left of handle and front of rim for Glasgow, but no makers’ marks.
The measure is in excellent condition with a dull grey finish. There is a small old repair to the thumb piece.
Circa 1830.
Size:
Height: 5.25 in (14cm) to top of thumb piece.
Base diameter: 2.75in (6.9cm).
Rim Diameter: 2.60in (6.50cm).
Shipping costs:
UK: £5.00
Europe: £10.00
USA/Canada: £15.00
Other countries: Please ask.
Numerous verification marks to the left of handle and front of rim for Glasgow, but no makers’ marks.
The measure is in excellent condition with a dull grey finish. There is a small old repair to the thumb piece.
Circa 1830.
Size:
Height: 5.25 in (14cm) to top of thumb piece.
Base diameter: 2.75in (6.9cm).
Rim Diameter: 2.60in (6.50cm).
Shipping costs:
UK: £5.00
Europe: £10.00
USA/Canada: £15.00
Other countries: Please ask.
SOLD
A PAIR OF ANTIQUE ENGLISH PEWTER 1 ...
Item Ref
K002
A fine pair of antique English pewter 1 pint tankards or measures with flared foot and decorative fillets; by John Curruthers Crane of Bewdley
Good George 1V Imperial Standard stamps to the front along with clear Worcester county verifications.
Verification marks to the left of handle, VR534 for Worcester County; stamped ‘PINT’ and very clear makers marks. The inside base also carries a ‘Crowned X’ makers ‘ICC’ mark and the words ‘IMPERIAL STANDARD’
The tankards are in excellent condition with a polished silver grey finish. There are no repairs or damage.
Circa 1830.
Size:
Height: 4.75 in (12cm).
Base diameter: 4.25in (10.7cm).
Rim Diameter: 3.25in (8.4cm).
Shipping costs:
UK: £7.00
Europe: £15.00
USA/Canada: £20.00
Other countries: Please ask.
Good George 1V Imperial Standard stamps to the front along with clear Worcester county verifications.
Verification marks to the left of handle, VR534 for Worcester County; stamped ‘PINT’ and very clear makers marks. The inside base also carries a ‘Crowned X’ makers ‘ICC’ mark and the words ‘IMPERIAL STANDARD’
The tankards are in excellent condition with a polished silver grey finish. There are no repairs or damage.
Circa 1830.
Size:
Height: 4.75 in (12cm).
Base diameter: 4.25in (10.7cm).
Rim Diameter: 3.25in (8.4cm).
Shipping costs:
UK: £7.00
Europe: £15.00
USA/Canada: £20.00
Other countries: Please ask.
SOLD
ANTIQUE FLEMISH PEWTER BULBOUS FLAGON WITH DOME ...
Item Ref
A007
A fine antique Flemish pewter flagon of bulbous form, with dome lid and ridged erect thumb piece.
The flagon is in excellent condition with a silver grey finish.
The flagon bears good marks to the base, makers touch mark, ‘hammer and initials I C’ for Jacob Cockelet, who died in 1794 and marked, ‘H.LEYS ANTWERPEN’. H Leys probably took over the business of Cockelet and continued to use his marks.
Early 19th Cent.
Size:
Height: 10.5 in (26.7cm).
Shipping costs:
UK: £10.00
Europe: £25.00
USA/Canada: £35.00
Other countries: Please ask.
The flagon is in excellent condition with a silver grey finish.
The flagon bears good marks to the base, makers touch mark, ‘hammer and initials I C’ for Jacob Cockelet, who died in 1794 and marked, ‘H.LEYS ANTWERPEN’. H Leys probably took over the business of Cockelet and continued to use his marks.
Early 19th Cent.
Size:
Height: 10.5 in (26.7cm).
Shipping costs:
UK: £10.00
Europe: £25.00
USA/Canada: £35.00
Other countries: Please ask.
SOLD
ANTIQUE FLEMISH PEWTER BULBOUS FLAGON WITH DOME ...
Item Ref
A015
A fine antique Flemish pewter flagon of bulbous form, with dome lid and ridged erect thumb piece.
The flagon is in excellent condition with a polished silver grey finish.
The flagon does not have any visible maker’s marks.
Circa 1780.
Size:
Height: 9.75in (25cm) to top of thumb piece.
Shipping costs:
UK: £10.00
Europe: £25.00
USA/Canada: £35.00
Other countries: Please ask.
The flagon is in excellent condition with a polished silver grey finish.
The flagon does not have any visible maker’s marks.
Circa 1780.
Size:
Height: 9.75in (25cm) to top of thumb piece.
Shipping costs:
UK: £10.00
Europe: £25.00
USA/Canada: £35.00
Other countries: Please ask.
SOLD
ANTIQUE PEWTER TRAVELING CHALICE, LATE 18TH / ...
Item Ref
K014
A fine antique three part traveling chalice, with a small cup on a beaded and knopped stem, raised on a domed foot with conforming bead decoration, the base is engraved with a cross.
The chalice is in excellent condition with a polished silver grey finish.
Late 18th / early 19th century.
Size:
Height: 9.25 in (23.5cm).
Shipping costs:
UK: £10.00
Europe: £20.00
USA/Canada: £30.00
Other countries: Please ask.
The chalice is in excellent condition with a polished silver grey finish.
Late 18th / early 19th century.
Size:
Height: 9.25 in (23.5cm).
Shipping costs:
UK: £10.00
Europe: £20.00
USA/Canada: £30.00
Other countries: Please ask.
SOLD
|
|
|
|